Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OP497FPZIC OPAMP GP 4 CIRCUIT 14DIP |
1,586 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 0.15V/µs | 500 kHz | - | 40 pA | 40 µV | 525µA (x4 Channels) | 25 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
OP11EPZIC OPAMP GP 4 CIRCUIT 14DIP |
1,854 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 1V/µs | - | - | 180 nA | 300 µV | - | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
AD604ARZIC VARIABLE GAIN 2 CIRC 24SOIC |
1,550 | - |
|
Datasheet | X-AMP® | 24-SOIC (0.295", 7.50mm Width) | Tube | Active | Variable Gain | 2 | - | 170V/µs | - | 40 MHz | 400 nA | 30 mV | 32mA | 40 mA | 5 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
LT1813DMS8#PBFIC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
1,364 | - |
|
Datasheet | LT® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Voltage Feedback | 2 | - | 750V/µs | 100 MHz | 200 MHz | 900 nA | 500 µV | 3mA (x2 Channels) | 60 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LT1813CDD#PBFIC VOLTAGE FEEDBACK 2 CIRC 8DFN |
3,304 | - |
|
Datasheet | LT® | 8-WFDFN Exposed Pad | Tube | Active | Voltage Feedback | 2 | - | 750V/µs | 100 MHz | 200 MHz | 900 nA | 500 µV | 3mA (x2 Channels) | 60 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
LT1396CMS8#PBFIC OPAMP CFA 2 CIRCUIT 8MSOP |
3,333 | - |
|
Datasheet | LT® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Current Feedback | 2 | - | 800V/µs | - | 400 MHz | 10 µA | 1 mV | 4.6mA (x2 Channels) | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 8-MSOP |
|
ADA4622-1ARZIC OPAMP JFET 1 CIRCUIT 8SOIC |
1,145 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 1 | Rail-to-Rail | 23V/µs | 8 MHz | 15.5 MHz | 2 pA | 40 µV | 715µA | 20 mA | 5 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LF398N8#PBFIC SAMPL/HOLD 1 CIRCUIT 8DIP |
1,766 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Sample and Hold | 1 | - | - | - | - | 10 nA | 2 mV | 4.5mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT6370IDD#PBFIC INST AMP 1 CIRCUIT 10DFN |
2,349 | - |
|
Datasheet | LT® | 10-WFDFN Exposed Pad | Tube | Active | Instrumentation | 1 | - | 11V/µs | - | 19 kHz | 100 pA | 15 µV | 2.65mA | 55 mA | 4.75 V | 35 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
LT1178CN8#PBFIC OPAMP GP 2 CIRCUIT 8DIP |
2,744 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 0.04V/µs | 85 kHz | - | 3 nA | 100 µV | 17µA (x2 Channels) | - | 5 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
