Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OP17BJ/883CIC OPAMP JFET 1 CIRCUIT TO99-8 |
3,627 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 50V/µs | 28 MHz | - | 30 pA | 400 µV | 4.6mA | - | 44 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
AD8620ARIC OPAMP JFET 2 CIRCUIT 8SOIC |
3,855 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 60V/µs | 25 MHz | - | 3 pA | 85 µV | 3mA (x2 Channels) | 45 mA | 10 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OP497FS-REELIC OPAMP GP 4 CIRCUIT 16SOIC |
2,666 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 0.15V/µs | 500 kHz | - | 40 pA | 40 µV | 525µA (x4 Channels) | 25 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LTC6412CUF#PBFIC VARIABLE GAIN 1 CIRCUIT 24QFN |
1,951 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tube | Last Time Buy | Variable Gain | 1 | Differential | - | - | 800 MHz | - | - | 110mA | - | 3 V | 3.6 V | 0°C ~ 70°C | - | - | Surface Mount | 24-QFN (4x4) |
|
LTC6363HMS8-0.5#PBFIC OPAMP DIFF 1 CIRCUIT 8MSOP |
2,673 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | Differential | 1 | Differential, Rail-to-Rail | 75V/µs | 500 MHz | 35 MHz | 100 nA | 25 µV | 1.9mA | 55 mA | 2.8 V | 11 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LT1216CN#PBFIC OPAMP GP 4 CIRCUIT 14DIP |
2,088 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 50V/µs | 23 MHz | - | 360 nA | 250 µV | 5.7mA (x4 Channels) | 50 mA | 2.5 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
OP05AZ/883CIC INST AMP 1 CIRCUIT 8CERDIP |
3,604 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 0.1V/µs | 600 kHz | - | 700 pA | 70 µV | - | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
PM155AZ/883CIC OPAMP JFET 1 CIRCUIT 8CERDIP |
3,922 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 5V/µs | 2.5 MHz | - | 30 nA | 1 mV | 2mA | - | 44 V | 44 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | 8-CERDIP |
|
|
OP02Z/883CIC OPAMP GP 1 CIRCUIT 8CERDIP |
4,157 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 1.3 MHz | - | 1 nA | 1 mV | - | - | 10 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
|
LTC6412IUF#PBFIC VARIABLE GAIN 1 CIRCUIT 24QFN |
3,204 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tube | Last Time Buy | Variable Gain | 1 | Differential | - | - | 800 MHz | - | - | 110mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
