Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9563901MGAIC OPAMP DIFF 1 CIRCUIT TO99-8 |
4,975 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Differential | 1 | - | 9.5V/µs | - | 3 MHz | - | 20 µV | 2.5mA | 45 mA | 12 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | TO-99-8 |
|
|
AD648THIC OPAMP JFET 2 CIRCUIT TO99-8 |
3,620 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 1.8V/µs | 1 MHz | 1 MHz | 3 pA | 300 µV | 340µA (x2 Channels) | 15 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
LT1209CS#PBFIC OPAMP GP 4 CIRCUIT 16SO |
2,739 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 400V/µs | 45 MHz | - | 4 µA | 1 mV | 7mA (x4 Channels) | 40 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
OP10BICYIC INST AMP 2 CIRCUIT 14CERDIP |
2,134 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 2 | - | 0.17V/µs | - | - | 1 nA | 200 µV | - | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
BUF03BIFJIC BUFFER 1 CIRCUIT TO99-8 |
1,190 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Buffer | 1 | - | 250V/µs | 50 MHz | - | 180 pA | 4 mV | 19mA | 100 mA | 36 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
OP64ARC/883CIC OPAMP GP 1 CIRCUIT 20CLCC |
2,915 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 1 | - | 170V/µs | 80 MHz | 2.7 MHz | 200 nA | 400 µV | 6.2mA | 80 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD8264ACPZ-R7IC VARIABLE GAIN 4 CIRC 40LFCSP |
2,804 | - |
|
Datasheet | - | 40-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Variable Gain | 4 | Differential | 380V/µs | - | 235 MHz | 5 µA | - | 99mA | - | 4.5 V | 10 V | -40°C ~ 105°C | - | - | Surface Mount | 40-LFCSP-WQ (6x6) |
|
|
AD515JH/+IC OPAMP JFET 1 CIRCUIT TO99-8 |
2,019 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | 10 V | 40 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
5962-89783012AIC OPAMP GP 2 CIRCUIT 20CLCC |
4,033 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 2 | - | - | - | - | 4.2 nA | 80 µV | 38µA | - | 1.6 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD600JRIC VARIABLE GAIN 2 CIRC 16SOIC |
4,807 | - |
|
Datasheet | X-AMP® | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | 11mA (x2 Channels) | 50 mA | 9.5 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
