Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1787HVHS8#TRPBFIC CURRENT SENSE 1 CIRCUIT 8SO |
2,786 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | - | - | 40 µV | 60µA | 50 µA | 2.5 V | 60 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
OP97EN8#PBFIC OPAMP GP 1 CIRCUIT 8DIP |
3,731 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 0.2V/µs | - | 900 kHz | 30 pA | 10 µV | 380µA | - | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AD744KRZ-REELIC OPAMP JFET 1 CIRCUIT 8SOIC |
2,545 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 75V/µs | - | 13 MHz | 30 pA | 250 µV | 3.5mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
AD8224ACPZ-RLIC INST AMP 2 CIRCUIT 16LFCSP |
4,867 | - |
|
Datasheet | - | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Instrumentation | 2 | Rail-to-Rail | 2V/µs | - | 1.5 MHz | 25 pA | 300 µV | 750µA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
LT1007CJ8IC OPAMP GP 1 CIRCUIT 8CERDIP |
3,701 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 2.5V/µs | 8 MHz | - | 15 nA | 20 µV | - | - | 8 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
|
LT1037CJ8IC OPAMP GP 1 CIRCUIT 8CERDIP |
2,906 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 15V/µs | 60 MHz | - | 15 nA | 20 µV | - | - | 8 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
|
OP97EJ8IC OPAMP GP 1 CIRCUIT 8CERDIP |
2,427 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.2V/µs | - | 900 kHz | 30 pA | 10 µV | 380µA | - | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD8672ARM-R2IC OPAMP GP 10MHZ DUAL LN 8MSOP |
3,806 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | General Purpose | 2 | - | 4V/µs | 10 MHz | - | 3 nA | 20 µV | 3mA (x2 Channels) | 20 mA | 10 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
LT1217CS8#TRPBFIC OPAMP CFA 1 CIRCUIT 8SO |
2,780 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 500V/µs | - | 10 MHz | 100 nA | 1 mV | 1mA | 100 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LTC1992-10CMS8#TRPBFIC OPAMP DIFF 1 CIRCUIT 8MSOP |
2,061 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 1.5V/µs | 3.2 MHz | - | 2 pA | 250 µV | 700µA | 30 mA | 2.7 V | 11 V | 0°C ~ 70°C | - | - | Surface Mount | 8-MSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
