Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC2054HVMPS5#TRPBFIC OPAMP ZER-DRIFT 1CIR TSOT23-5 |
3,229 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.5V/µs | 500 kHz | - | 3 pA | 0.5 µV | 175µA | - | 2.7 V | 11 V | -55°C ~ 150°C | - | - | Surface Mount | TSOT-23-5 |
|
LTC6412IUF#TRPBFIC VARIABLE GAIN 1 CIRCUIT 24QFN |
2,085 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | Variable Gain | 1 | Differential | - | - | 800 MHz | - | - | 110mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
LTC2052HVCGN#TRPBFIC OPAMP ZERO-DRIFT 4CIRC 16SSOP |
4,611 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 4 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x4 Channels) | - | 2.7 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SSOP |
|
LTC2052HVIS#TRPBFIC OPAMP ZERO-DRIFT 4 CIRC 14SO |
1,894 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 4 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x4 Channels) | - | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
LT1469CDF#TRPBFIC OPAMP GP 2 CIRCUIT 12DFN |
2,640 | - |
|
Datasheet | LT® | 12-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | - | 22V/µs | 90 MHz | - | 3 nA | 50 µV | 4.1mA (x2 Channels) | 22 mA | 5 V | 9 V | 0°C ~ 70°C | - | - | Surface Mount | 12-DFN (4x4) |
|
LTC6373HDFM#TRPBFIC INST AMP 1 CIRCUIT 12DFN |
2,518 | - |
|
Datasheet | - | 12-WFDFN Exposed Pad | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | Rail-to-Rail | 12V/µs | - | 7.5 MHz | 2 pA | 92 µV | 4.4mA | 47 mA | 9 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount, Wettable Flank | 12-DFN (4x4) |
|
AD8672ARMZ-R2IC OPAMP GP 10MHZ DUAL LN 8MSOP |
3,671 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | General Purpose | 2 | - | 4V/µs | 10 MHz | - | 3 nA | 20 µV | 3mA (x2 Channels) | 20 mA | 10 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
ADA4817-2ACPZ-RLIC OPAMP VFB 2 CIRCUIT 16LFCSP |
1,802 | - |
|
Datasheet | FastFET™ | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 870V/µs | 410 MHz | 1.05 GHz | 2 pA | 400 µV | 19mA (x2 Channels) | 40 mA | 5 V | 10 V | -40°C ~ 105°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
OP227GJIC OPAMP GP 2 CIRCUIT 14CERDIP |
2,584 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 2.8V/µs | 8 MHz | - | 15 nA | 60 µV | - | - | 8 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 14-CERDIP |
|
|
LT1674CS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
3,623 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA (x4 Channels) | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
