Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1499IS#TRPBFIC OPAMP GP 4 CIRCUIT 14SO |
4,393 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 6V/µs | 10.5 MHz | - | 500 nA | 200 µV | 1.8mA (x4 Channels) | 30 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
LTC6269HDD-10#TRPBFIC OPAMP JFET 2 CIRCUIT 10DFN |
2,122 | - |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 2 | - | 1500V/µs | 4 GHz | - | 0.003 pA | 200 µV | 16.5mA (x2 Channels) | 90 mA | 3.1 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 10-DFN (3x3) |
|
LTC6269HMS8E-10#TRPBFIC OPAMP JFET 2 CIRCUIT 8MSOP |
4,228 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | J-FET | 2 | - | 1500V/µs | 4 GHz | - | 0.003 pA | 200 µV | 16.5mA (x2 Channels) | 90 mA | 3.1 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP-EP |
|
|
LT6204IS#TRPBFIC OPAMP GP 4 CIRCUIT 14SO |
3,193 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 25V/µs | 100 MHz | - | 3.8 µA | 2.6 mV | 2.8mA (x4 Channels) | 40 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
LT6020HMS8#TRPBFIC OPAMP GP 2 CIRCUIT 8MSOP |
1,640 | - |
|
Datasheet | LT® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 5V/µs | 400 kHz | - | 100 pA | 5 µV | 90µA (x2 Channels) | 11 mA | 3 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LT1229MJ8IC OPAMP CFA 2 CIRCUIT 8CERDIP |
1,621 | - |
|
Datasheet | LT® | 8-CDIP (0.300", 7.62mm) | - | Obsolete | Current Feedback | 2 | - | 700V/µs | 100 MHz | 100 MHz | - | 3 mV | 6mA (x2 Channels) | 125 mA | 4 V | 30 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
AD746JRZ-REEL7IC OPAMP JFET 2 CIRCUIT 8SOIC |
4,189 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 75V/µs | 13 MHz | 13 MHz | 110 pA | 300 µV | 7mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LTC6253IMS-7#TRPBFIC OPAMP GP 2 CIRCUIT 10MSOP |
2,264 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 500V/µs | 2 GHz | 400 MHz | 1.4 µA | 50 µV | 4.25mA (x2 Channels) | 100 mA | 2.5 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
|
LT1167ACS8-1#TRPBFIC INST AMP 1 CIRCUIT 8SO |
4,908 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 1.2V/µs | 1 MHz | - | 50 pA | 15 µV | 900µA | - | 4.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LT1210CS#TRPBFIC OPAMP CFA 1 CIRCUIT 16SO |
4,023 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 900V/µs | - | 35 MHz | - | 3 mV | 35mA | 2 A | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
