Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1058CJIC OPAMP JFET 4 CIRCUIT 14CERDIP |
1,227 | - |
|
Datasheet | LT® | 14-CDIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 13V/µs | 5 MHz | - | 7 pA | 250 µV | 1.7mA (x4 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-CERDIP |
|
AD845JRZ-16-REEL7IC OPAMP JFET 1 CIRCUIT 16SOIC |
1,899 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 100V/µs | 16 MHz | - | 750 pA | 700 µV | 10mA | 50 mA | 9.5 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LT1795ISW#TRPBFIC OPAMP CFA 2 CIRCUIT 20SO |
1,595 | - |
|
Datasheet | LT® | 20-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Current Feedback | 2 | - | 900V/µs | - | 65 MHz | 10 µA | 3 mV | 29mA (x2 Channels) | 1 A | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 20-SO |
|
AD8224BCPZ-RLIC INST AMP 2 CIRCUIT 16LFCSP |
2,073 | - |
|
Datasheet | - | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Instrumentation | 2 | Rail-to-Rail | 2V/µs | - | 1.5 MHz | 10 pA | 175 µV | 750µA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
LT1499HS#TRPBFIC OPAMP GP 4 CIRCUIT 14SO |
3,092 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 6V/µs | 10.5 MHz | - | 500 nA | 200 µV | 1.8mA (x4 Channels) | 30 mA | 2.2 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
LT1884IS8#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
4,241 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 150 pA | 30 µV | 850µA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
AD8428ARZ-RLIC INST AMP 1 CIRCUIT 8SOIC |
2,928 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 50V/µs | - | 3.5 MHz | 200 nA | 100 µV | 6.5mA | 30 mA | 8 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8224HBCPZ-RLIC INST AMP 2 CIRCUIT 16LFCSP |
2,232 | - |
|
Datasheet | - | 16-VQFN, CSP | Tape & Reel (TR) | Active | Instrumentation | 2 | Rail-to-Rail | 2V/µs | - | 1.5 MHz | 10 pA | 175 µV | 750µA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-VQ (4x4) |
|
OP237EN#PBFIC OPAMP GP 2 CIRCUIT 14DIP |
1,708 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 15V/µs | 63 MHz | - | 10 nA | 20 µV | - | - | 8 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
LT1168AIS8#TRPBFIC INST AMP 1 CIRCUIT 8SO |
3,156 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.5V/µs | 400 kHz | - | 40 pA | 15 µV | 350µA | 32 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
