Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1464CS8IC OPAMP JFET 2 CIRCUIT 8SO |
1,838 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 0.9V/µs | 1 MHz | - | 0.5 pA | 600 µV | 145µA (x2 Channels) | - | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LT1465CNIC OPAMP JFET 4 CIRCUIT 14DIP |
2,515 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 4 | - | 0.9V/µs | 1 MHz | - | 0.5 pA | 600 µV | 145µA (x4 Channels) | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LT1465CSIC OPAMP JFET 4 CIRCUIT 14SO |
2,062 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 0.9V/µs | 1 MHz | - | 0.5 pA | 600 µV | 145µA (x4 Channels) | - | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
|
LT1468IS8IC OPAMP GP 1 CIRCUIT 8SO |
1,766 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 22V/µs | 90 MHz | - | 10 nA | 30 µV | 3.9mA | 22 mA | 9 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LT1638CMS8IC OPAMP GP 2 CIRCUIT 8MSOP |
1,643 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 20 nA | 400 µV | 205µA (x2 Channels) | 40 mA | 2.5 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
LT1638IS8IC OPAMP GP 2 CIRCUIT 8SO |
1,918 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 20 nA | 250 µV | 205µA (x2 Channels) | 40 mA | 2.5 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
LT1639INIC OPAMP GP 4 CIRCUIT 14DIP |
3,659 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 20 nA | 350 µV | 205µA (x4 Channels) | 40 mA | 2.5 V | 44 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
LT1639ISIC OPAMP GP 4 CIRCUIT 14SO |
3,545 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 20 nA | 350 µV | 205µA (x4 Channels) | 40 mA | 2.5 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
|
LTC1050HS8IC OPAMP ZER-DRIFT 1CIRC 8SO |
1,746 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Chopper (Zero-Drift) | 1 | - | 4V/µs | 2.5 MHz | - | 10 pA | 0.5 µV | 1mA | - | 4.75 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LTC2052HVISIC OPAMP ZER-DRIFT 4CIRC 14SO |
3,728 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Chopper (Zero-Drift) | 4 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x4 Channels) | - | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
