Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1057ACN8IC OPAMP JFET 2 CIRCUIT 8DIP |
4,907 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 14V/µs | 5 MHz | - | 5 pA | 150 µV | 1.6mA (x2 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1001CS8IC OPAMP GP 1 CIRCUIT 8SO |
1,961 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 0.25V/µs | 800 kHz | - | 700 pA | 18 µV | - | - | 6 V | 36 V | 0°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LT1216CNIC OPAMP GP 4 CIRCUIT 14DIP |
2,085 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 50V/µs | 23 MHz | - | 360 nA | 250 µV | 5.7mA (x4 Channels) | 50 mA | 2.5 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
LT1124CS8IC OPAMP GP 2 CIRCUIT 8SO |
3,543 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 4.5V/µs | 12.5 MHz | - | 7 nA | 25 µV | 2.3mA (x2 Channels) | - | 8 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LT1125CSWIC OPAMP GP 4 CIRCUIT 16SO |
2,459 | - |
|
Datasheet | LT® | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | General Purpose | 4 | - | 4.5V/µs | 12.5 MHz | - | 8 nA | 30 µV | 2.3mA (x4 Channels) | - | 8 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
LT1367CSIC OPAMP GP 4 CIRCUIT 14SO |
2,963 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.13V/µs | 400 kHz | - | 10 nA | 200 µV | 370µA (x4 Channels) | 75 mA | 1.8 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
|
LT1368CS8IC OPAMP GP 2 CIRCUIT 8SO |
3,812 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.065V/µs | 160 kHz | - | 10 nA | 200 µV | 370µA (x2 Channels) | 75 mA | 1.8 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1457S8IC OPAMP JFET 2 CIRCUIT 8SO |
1,170 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 4V/µs | 1.7 MHz | - | 7 pA | 220 µV | 1.8mA (x2 Channels) | - | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
LTC1052CN8IC OPAMP GP 1 CIRCUIT 8DIP |
1,416 | - |
|
Datasheet | LTCMOS™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 4V/µs | - | - | - | - | - | - | - | - | - | - | - | Through Hole | 8-PDIP |
|
LTC1100CN8IC OPAMP ZER-DRIFT 1CIRC 8DIP |
2,570 | - |
|
Datasheet | LTCMOS™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | - | 18 kHz | - | 2.5 pA | 1 µV | 2.4mA | - | 5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
