Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1209CSIC OPAMP GP 4 CIRCUIT 16SO |
4,959 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 400V/µs | 45 MHz | - | 4 µA | 1 mV | 7mA (x4 Channels) | 40 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
LT1220CS8IC OPAMP GP 1 CIRCUIT 8SO |
2,402 | - |
|
Datasheet | C-Load™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 250V/µs | 45 MHz | - | 100 nA | 500 µV | 8mA | 26 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1223CS8IC OPAMP CFA 1 CIRCUIT 8SO |
4,133 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 1 | - | 1300V/µs | - | 100 MHz | 1 µA | 1 mV | 6mA | 60 mA | 8 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LTC1047CN8IC OPAMP ZER-DRIFT 2CIRC 8DIP |
4,458 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 2 | - | 0.2V/µs | 200 kHz | - | 5 pA | 3 µV | 80µA (x2 Channels) | - | 4.75 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LTC1050CS8IC OPAMP ZER-DRIFT 1CIRC 8SO |
4,892 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Chopper (Zero-Drift) | 1 | - | 4V/µs | 2.5 MHz | - | 10 pA | 0.5 µV | 1mA | - | 4.75 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LTC1051CN8IC OPAMP ZER-DRIFT 2CIRC 8DIP |
2,086 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 2 | - | 4V/µs | 2.5 MHz | - | 15 pA | 0.5 µV | 1mA (x2 Channels) | - | 4.75 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LTC1051CSWIC OPAMP ZER-DRIFT 2CIRC 16SO |
2,755 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Chopper (Zero-Drift) | 2 | - | 4V/µs | 2.5 MHz | - | 15 pA | 0.5 µV | 1mA (x2 Channels) | - | 4.75 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
|
LTC1150CN8IC OPAMP ZER-DRIFT 1CIRC 8DIP |
2,518 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 3V/µs | 2.5 MHz | - | 10 pA | 0.5 µV | 800µA | - | 4.75 V | 32 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LTC1150CS8IC OPAMP ZER-DRIFT 1CIRC 8SO |
3,325 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Chopper (Zero-Drift) | 1 | - | 3V/µs | 2.5 MHz | - | 10 pA | 0.5 µV | 800µA | - | 4.75 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1354CS8IC VOLTAGE FEEDBACK 1 CIRC 8SO |
1,388 | - |
|
Datasheet | C-Load™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | - | 400V/µs | 12 MHz | - | 80 nA | 300 µV | 1mA | 30 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
