Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD215BYIC OPAMP ISOLATION 1 CIRC 12SIP |
1,597 | - |
|
Datasheet | - | 44-SIP, 12 Leads, Offset Leads | Tube | Obsolete | Isolation | 1 | - | 6V/µs | - | 120 kHz | 300 pA | 400 µV | 40mA | 5 mA | 28.5 V | 34 V | -40°C ~ 85°C | - | - | Through Hole | 12-SIP |
|
HMC750LP4EIC LIMITING 1 CIRCUIT 24SMT |
1,387 | - |
|
Datasheet | - | 24-VFQFN Exposed Pad | Bulk | Obsolete | Limiting | 1 | Differential | - | - | - | - | 3 mV | 106mA | - | 4.6 V | 5.4 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
AD202KYIC OPAMP ISOLATION 2 CIRC 11SIP |
1,145 | - |
|
Datasheet | - | 38-SIP, 11 Leads, Offset Leads | Tube | Obsolete | Isolation | 2 | - | - | 2 kHz | - | 30 pA | 5 mV | 5mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 11-SIP |
|
AD202KNIC OPAMP ISOLATION 2 CIRC 11DIP |
4,565 | - |
|
Datasheet | - | 38-DIP (0.600", 15.24mm), 11 Leads | Tube | Obsolete | Isolation | 2 | - | - | 2 kHz | - | 30 pA | 5 mV | 5mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 11-PDIP |
|
AD204KNIC OPAMP ISOLATION 2 CIRC 11DIP |
2,392 | - |
|
Datasheet | - | 38-DIP (0.600", 15.24mm), 11 Leads | Tube | Obsolete | Isolation | 2 | - | - | 5 kHz | - | 30 pA | 5 mV | - | 2 mA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 11-PDIP |
|
AD621SQ/883BIC INST AMP 1 CIRCUIT 8CERDIP |
1,963 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | - | 800 kHz | 500 pA | 75 µV | 900µA | 18 mA | 4.6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
5962-9211701M2AIC OPAMP GP 2 CIRCUIT 20CLCC |
4,903 | - |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 2 | - | 300V/µs | 50 MHz | - | 3.3 µA | 300 µV | 10mA | 32 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD210JNIC OPAMP ISOLATION 1 CIRC 12DIP |
2,156 | - |
|
Datasheet | - | 38-DIP (0.800", 20.32mm), 12 Leads | Tube | Obsolete | Isolation | 1 | - | 1V/µs | - | 20 kHz | 30 pA | 15 mV | 50mA | 5 mA | 14.25 V | 15.75 V | -25°C ~ 85°C | - | - | Through Hole | 12-PDIP |
|
5962-8777101M3AIC OPAMP GP 4 CIRCUIT 28LCC |
2,567 | - |
|
Datasheet | - | 28-LCC | Tube | Active | General Purpose | 4 | Differential | 0.15V/µs | 500 kHz | - | 750 pA | 40 µV | 600µA (x4 Channels) | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 28-LCC (11.43x11.43) |
|
AD210BNIC OPAMP ISOLATION 1 CIRC 12DIP |
3,837 | - |
|
Datasheet | - | 38-DIP (0.800", 20.32mm), 12 Leads | Tube | Obsolete | Isolation | 1 | - | 1V/µs | - | 20 kHz | 30 pA | 5 mV | 50mA | 5 mA | 14.25 V | 15.75 V | -25°C ~ 85°C | - | - | Through Hole | 12-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
