Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-8856502CAIC OPAMP GP 4 CIRCUIT 14CERDIP |
2,663 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 8V/µs | 6.5 MHz | - | 25 nA | 800 µV | - | - | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
AD8229HRZ-R7IC INST AMP 1 CIRCUIT 8SOIC |
4,805 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 22V/µs | - | 15 MHz | 70 nA | 100 µV | 6.7mA | 35 mA | 8 V | 34 V | -40°C ~ 175°C | - | - | Surface Mount | 8-SOIC |
|
AD524SD/883BIC INST AMP 1 CIRCUIT 16CDIP |
3,760 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 1 MHz | 1 MHz | 50 nA | 100 µV | 3.5mA | - | 12 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 16-CDIP |
|
AD203SNIC OPAMP ISOLATION 1 CIRC 11DIP |
4,697 | - |
|
Datasheet | - | 38-DIP (0.500", 12.70mm), 11 Leads | Bulk | Obsolete | Isolation | 1 | - | 0.5V/µs | 10 kHz | - | 30 pA | 5 mV | 20mA | 4 mA | 12 V | 15 V | -55°C ~ 125°C | - | - | Through Hole | 11-PDIP |
|
AD549SH/883BIC OPAMP GP 1 CIRCUIT TO99-8 |
2,099 | - |
|
Datasheet | - | TO-99-8 Metal Can | Tube | Active | General Purpose | 1 | - | 3V/µs | 1 MHz | - | 0.075 pA | 300 µV | 600µA | 20 mA | 10 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | TO-99-8 |
|
5962-9095502M2AIC LOGARITHMIC 1 CIRCUIT 20CLCC |
2,328 | - |
|
Datasheet | - | 20-CLCC | Tube | Active | Logarithmic | 1 | Differential | - | - | 350 MHz | 7 µA | 50 µV | 35mA | 2.3 mA | 9 V | 15 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
|
LT1213CS8IC OPAMP GP 2 CIRCUIT 8SO |
4,803 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 12V/µs | 28 MHz | - | 90 nA | 150 µV | 3.4mA (x2 Channels) | 50 mA | 2.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LT1178ACN8IC OPAMP GP 2 CIRCUIT 8DIP |
4,032 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.04V/µs | 85 kHz | - | 3 nA | 80 µV | 16µA (x2 Channels) | - | 5 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LT1357CN8IC VOLTAGE FEEDBACK 1 CIRC 8DIP |
4,751 | - |
|
Datasheet | C-Load™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 600V/µs | 25 MHz | - | 120 nA | 200 µV | 2mA | 30 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1230CSIC OPAMP CFA 4 CIRCUIT 14SO |
3,095 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 4 | - | 700V/µs | - | 100 MHz | 10 µA | 3 mV | 6mA (x4 Channels) | 125 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
