Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1007CN8IC OPAMP GP 1 CIRCUIT 8DIP |
4,605 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 2.5V/µs | 8 MHz | - | 15 nA | 20 µV | - | - | 8 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1013DS8IC OPAMP GP 2 CIRCUIT 8SO |
1,203 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 0.4V/µs | 1 MHz | - | 15 nA | 60 µV | 350µA (x2 Channels) | 20 mA | 4 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1028CN8IC OPAMP GP 1 CIRCUIT 8DIP |
3,201 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 15V/µs | 75 MHz | - | 30 nA | 20 µV | 7.6mA | - | 8 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1058CNIC OPAMP JFET 4 CIRCUIT 14DIP |
3,399 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 13V/µs | 5 MHz | - | 7 pA | 250 µV | 1.7mA (x4 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
LT1078CN8IC OPAMP GP 2 CIRCUIT 8DIP |
2,391 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.1V/µs | 200 kHz | - | 6 nA | 70 µV | 47µA (x2 Channels) | - | 2.2 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LT1079CNIC OPAMP GP 4 CIRCUIT 14DIP |
4,759 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.1V/µs | 200 kHz | - | 6 nA | 80 µV | 38µA (x4 Channels) | - | 2.2 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
LT1228CN8IC OPAMP CFA 1 CIRCUIT 8DIP |
3,621 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 1 | - | 3500V/µs | - | 100 MHz | 10 µA | 3 mV | 6mA | 125 mA | 4 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LT1112ACN8IC OPAMP GP 2 CIRCUIT 8DIP |
2,831 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.3V/µs | 750 kHz | - | 70 pA | 20 µV | 350µA (x2 Channels) | - | 2 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1357CS8IC VOLTAGE FEEDBACK 1 CIRC 8SO |
3,159 | - |
|
Datasheet | C-Load™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | - | 600V/µs | 25 MHz | - | 120 nA | 200 µV | 2mA | 30 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LT1214CSIC OPAMP GP 4 CIRCUIT 16SO |
4,753 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | - | 12V/µs | 28 MHz | - | 90 nA | 150 µV | 3.4mA (x4 Channels) | 50 mA | 2.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
