Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
L165VIC POWER 1 CIRCUIT 5PENTAWATT |
4,878 | - |
|
Datasheet | - | Pentawatt-5 (Vertical, Bent and Staggered Leads) | Tube | Obsolete | Power | 1 | - | 8V/µs | - | - | 200 nA | 2 mV | 40mA | 3.5 A | 12 V | 36 V | - | - | - | Through Hole | 5-PENTAWATT |
|
TS27L4AIPTIC CMOS 4 CIRCUIT 14TSSOP |
3,847 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | - | 0.04V/µs | 100 kHz | - | 1 pA | 900 µV | 10µA (x4 Channels) | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LMX321ILTIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,899 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.7V/µs | 1.3 MHz | - | 27 nA | 4 mV | 130µA | 70 mA | 2.3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LS204CNIC OPAMP GP 2 CIRCUIT 8MINI DIP |
4,201 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 2.5 MHz | - | 100 nA | 500 µV | 800µA | 23 mA | 6 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-Mini DIP |
|
|
TL072BINIC OPAMP JFET 2 CIRC 8MINI DIP |
4,485 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 16V/µs | 4 MHz | - | 20 pA | 1 mV | 1.4mA | 40 mA | 6 V | 36 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Through Hole | 8-Mini DIP |
|
TS942AIPTIC OPAMP GP 2 CIRCUIT 8TSSOP |
3,596 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.0045V/µs | 10 kHz | - | 1 pA | 5 mV | 1.2µA (x2 Channels) | 5 mA | 2.5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
TSH72CDIC OPAMP GP 2 CIRCUIT 8SO |
3,445 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 118V/µs | 65 MHz | 100 MHz | 6 µA | 1.1 mV | 8.2mA | 55 mA | 3 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
TSH94IDTIC OPAMP GP 4 CIRCUIT 16SO |
1,704 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 110V/µs | 150 MHz | - | 5 µA | 3 mV | 4.5mA (x4 Channels) | 40 mA | 7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 16-SO |
|
|
TS922AINIC OPAMP GP 2 CIRCUIT 8MINI DIP |
2,178 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.3V/µs | 4 MHz | - | 15 nA | 900 µV | 2mA | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-Mini DIP |
|
TS27M4INIC CMOS 4 CIRCUIT 14DIP |
2,724 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | - | 0.6V/µs | 1 MHz | - | 1 pA | 1.1 mV | 150µA (x4 Channels) | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 14-DIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
