Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
L272MIC OPAMP GP 2 CIRCUIT 8MINI DIP |
1,414 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 300 nA | 15 mV | 8mA | 700 mA | 4 V | 28 V | -40°C ~ 85°C | - | - | Through Hole | 8-Mini DIP |
|
TS27L2CPTIC CMOS 2 CIRCUIT 8TSSOP |
1,849 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | - | 0.04V/µs | 100 kHz | - | 1 pA | 1.1 mV | 10µA (x2 Channels) | 45 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-TSSOP |
|
L2720IC OPAMP GP 2 CIRCUIT 16POWERDIP |
3,334 | - |
|
Datasheet | - | 16-PowerDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 2V/µs | 1.2 MHz | - | 200 nA | 10 mV | 10mA | 1.5 A | 4 V | 28 V | -40°C ~ 85°C | - | - | Through Hole | 16-PowerDIP |
|
|
L272IC OPAMP GP 2 CIRCUIT 16POWERDIP |
4,710 | - |
|
Datasheet | - | 16-PowerDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 300 nA | 15 mV | 8mA | 1 A | 4 V | 28 V | -40°C ~ 85°C | - | - | Through Hole | 16-PowerDIP |
|
TS934INIC OPAMP GP 2 CIRCUIT 14DIP |
4,547 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.05V/µs | 100 kHz | - | 1 pA | 10 mV | 20µA (x2 Channels) | 5 mA | 2.7 V | 10 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Through Hole | 14-DIP |
|
TSH95IDTIC OPAMP GP 4 CIRCUIT 16SO |
2,411 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 110V/µs | 150 MHz | - | 5 µA | 4 mV | 4.5mA (x4 Channels) | 40 mA | 7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 16-SO |
|
TSH31IDIC OPAMP GP 1 CIRCUIT 8SOIC |
1,310 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 300V/µs | 280 MHz | - | 2 pA | 3 mV | 20mA | 70 mA | 6 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TS514AIDIC OPAMP GP 4 CIRCUIT 14SO |
3,091 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 1.5V/µs | 3 MHz | - | 50 nA | 500 µV | 500µA | 23 mA | 6 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
TSV6191ILTIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,072 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.08V/µs | 450 kHz | - | 1 pA | 4 mV | 10.5µA | 63 mA | 1.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
TS27M2ACDIC CMOS 2 CIRCUIT 8SOIC |
2,043 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | - | 0.6V/µs | 1 MHz | - | 1 pA | 900 µV | 150µA (x2 Channels) | 45 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
