Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM2902BYDTLINEAR IC'S |
4,505 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Push-Pull | 0.75V/µs | 1.2 MHz | - | 150 nA | 4 mV | 1.4mA | 32 mA | 3 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
|
LM2902BYQ5TVFQFPN 3X3X0.9 1.7 16L |
1,162 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Standard | 4 | Push-Pull | 0.75V/µs | 1.2 MHz | - | 150 nA | 4 mV | 350µA (x4 Channels) | 32 mA | 3 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount, Wettable Flank | 16-QFN (3x3) |
|
TL081CNIC OPAMP JFET 1 CIRCUIT 8DIP |
4,216 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 16V/µs | 4 MHz | - | 20 pA | 3 mV | 1.4mA | 40 mA | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-DIP |
|
|
TS462CNIC OPAMP GP 2 CIRCUIT 8MINI DIP |
2,462 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 4V/µs | 12 MHz | - | 200 nA | 1 mV | 2mA (x2 Channels) | - | 2.7 V | 10 V | -20°C ~ 70°C | - | - | Through Hole | 8-Mini DIP |
|
TJM4558CDIC OPAMP GP 2 CIRCUIT 8SOIC |
2,661 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 2.2V/µs | 5.5 MHz | - | 50 nA | 1 mV | 2.3mA | 20 mA | 44 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TJM4558CNIC OPAMP GP 2 CIRCUIT 8MINI DIP |
4,922 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 2.2V/µs | 5.5 MHz | - | 50 nA | 1 mV | 2.3mA | 20 mA | 44 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-Mini DIP |
|
|
TS951INIC OPAMP GP 1 CIRCUIT 8DIP |
3,625 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1V/µs | 3 MHz | - | 35 nA | 6 mV | 950µA | 10 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Through Hole | 8-DIP |
|
|
UA741INIC OPAMP GP 1 CIRCUIT 8DIP |
2,361 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 10 nA | 1 mV | 1.7mA | 25 mA | 10 V | 44 V | -40°C ~ 105°C | - | - | Through Hole | 8-DIP |
|
TS27L4INIC CMOS 4 CIRCUIT 14DIP |
2,643 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | - | 0.04V/µs | 100 kHz | - | 1 pA | 1.1 mV | 10µA (x4 Channels) | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 14-DIP |
|
|
LM201ANIC OPAMP GP 1 CIRCUIT 8DIP |
4,520 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 25 nA | 700 µV | 1.8mA | 30 mA | 10 V | 44 V | -40°C ~ 105°C | - | - | Through Hole | 8-DIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
