Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MC33174NIC OPAMP GP 4 CIRCUIT 14DIP |
1,648 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 2V/µs | 2.1 MHz | - | 100 nA | 1 mV | 220µA | 27 mA | 4 V | 44 V | -40°C ~ 105°C | - | - | Through Hole | 14-DIP |
|
LM224WDTLINEAR IC'S |
4,791 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Push-Pull | 0.4V/µs | 1.3 MHz | - | 20 nA | 2 mV | 1.5mA | 40 mA | 3 V | 30 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SO |
|
TL062CNIC OPAMP JFET 2 CIRC 8MINI DIP |
2,688 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | 20 mA | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-Mini DIP |
|
MC4558IPTIC OPAMP GP 2 CIRCUIT 8SO |
2,403 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 2.2V/µs | 5.5 MHz | - | 50 nA | 1 mV | 2.3mA | 20 mA | 4 V | 40 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SO |
|
|
TS27L2AIDIC CMOS 2 CIRCUIT 8SOIC |
2,549 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | - | 0.04V/µs | 100 kHz | - | 1 pA | 1.1 mV | 10µA (x2 Channels) | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TSV911IDIC OPAMP GP 1 CIRCUIT 8SOIC |
2,929 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 4.5V/µs | 8 MHz | - | 1 pA | 4.5 mV | 820µA | 35 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TSL6002IDTLinear IC's |
2,691 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Standard | 2 | Single Ended, Rail-to-Rail | 0.4V/µs | 1 MHz | - | 1 pA | 750 µV | 75µA (x2 Channels) | 30 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LM358YPTIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,901 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.6V/µs | 1.1 MHz | - | 20 nA | 2 mV | 700µA (x2 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
TSM104WAINIC OPAMP GP 4 CIRCUIT 16DIP |
3,955 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.3V/µs | 900 kHz | - | 20 nA | 500 µV | 1.4mA | 40 mA | 3 V | 32 V | -40°C ~ 105°C | - | - | Through Hole | 16-DIP |
|
|
LM2904BYDTLinear IC's |
1,507 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Standard | 2 | Push-Pull | 0.75V/µs | 1.2 MHz | - | 150 nA | 4 mV | 350µA (x2 Channels) | 32 mA | 3 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
