Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TS271INIC OPAMP GP 1 CIRCUIT 8DIP |
3,644 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.04V/µs | 100 kHz | - | 1 pA | 1.1 mV | 10µA | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 8-DIP |
|
LM2904AHYQ6TWDFPN 2X2X0.8 8 P 0.5 WET FLK |
4,309 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Standard | 2 | Single-Ended | 0.6V/µs | 1.1 MHz | - | 20 nA | 1 mV | 350µA (x2 Channels) | 40 mA | 3 V | 30 V | -40°C ~ 150°C | Automotive | AEC-Q100 | Surface Mount, Wettable Flank | 8-DFN (2x2) |
|
|
TSL6004IPTLINEAR IC'S |
1,369 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.4V/µs | 1 MHz | - | 1 pA | 750 µV | 75µA | 30 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TSM104AINIC OPAMP GP 4 CIRCUIT 16DIP |
3,871 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.3V/µs | 900 kHz | - | 20 nA | 500 µV | 1.4mA | 40 mA | 3 V | 32 V | -40°C ~ 105°C | - | - | Through Hole | 16-DIP |
|
LM2902HDTIC OPAMP GP 4 CIRCUIT 14SO |
4,854 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Push-Pull | 0.4V/µs | 1.3 MHz | - | 20 nA | 2 mV | - | 20 mA | 3 V | 30 V | -40°C ~ 150°C | - | - | Surface Mount | 14-SO |
|
|
TS932INIC OPAMP GP 2 CIRCUIT 8MINI DIP |
1,065 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.05V/µs | 100 kHz | - | 1 pA | 10 mV | 20µA (x2 Channels) | 5 mA | 2.7 V | 10 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Through Hole | 8-Mini DIP |
|
TS1852IDIC OPAMP GP 2 CIRCUIT 8SOIC |
3,882 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.25V/µs | 630 kHz | - | 16 nA | 1 mV | 162µA | 48 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LS204IDTIC OPAMP GP 2 CIRCUIT 8SOIC |
3,183 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 1.5V/µs | 3 MHz | - | 50 nA | 500 µV | 700µA | 23 mA | 6 V | 30 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOIC |
|
|
LM2904WHDIC OPAMP GP 2 CIRCUIT 8SOIC |
2,448 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Single-Ended | 0.6V/µs | 1.1 MHz | - | 20 nA | 2 mV | 700µA | 40 mA | 3 V | 30 V | -40°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
|
TSH60CDTIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,970 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 98V/µs | - | 74 MHz | 6 µA | 1.2 mV | 9.8mA | 45 mA | 4.5 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
