Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2202AIDG4IC CMOS 2 CIRCUIT 14SOIC |
3,014 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 1 pA | 80 µV | 1.8mA (x2 Channels) | 50 mA | 4.6 V | 16 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LF411ACH/NOPBIC OPAMP JFET 1 CIRCUIT TO99-8 |
4,076 | - |
|
Datasheet | BI-FET II™ | TO-99-8 Metal Can | Box | Obsolete | J-FET | 1 | - | 15V/µs | 4 MHz | - | 50 pA | 300 µV | 1.8mA | - | 10 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
|
TLC2254AQDREPIC OPAMP GP 4 CIRCUIT 14SOIC |
1,083 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 80µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
|
TLE2064IDIC OPAMP JFET 4 CIRCUIT 14SOIC |
3,154 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
OPA129UE4IC OPAMP GP 1 CIRCUIT 8SOIC |
2,392 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 2.5V/µs | 1 MHz | - | 0.03 pA | 1 mV | 1.2mA | 10 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA2322EA/250IC INST AMP 2 CIRCUIT 14TSSOP |
3,845 | - |
|
Datasheet | microPOWER™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 2 | Rail-to-Rail | 0.4V/µs | - | 500 kHz | 0.5 pA | 2 mV | 40µA (x2 Channels) | 16 mA | 2.5 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
OPA227PG4IC OPAMP GP 1 CIRCUIT 8DIP |
3,049 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 5 µV | 3.7mA | - | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS3091DDARG3IC OPAMP CFA 1 CIRC 8SOPWRPAD |
4,145 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 7300V/µs | - | 235 MHz | 4 µA | 900 µV | 9.5mA | 280 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
THS4031IDRIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,848 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 100V/µs | - | 100 MHz | 3 µA | 500 µV | 8.5mA | 90 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LM6152ACMIC OPAMP GP 2 CIRCUIT 8SOIC |
1,364 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 30V/µs | 80 MHz | - | 500 nA | 300 µV | 1.6mA (x2 Channels) | 16.9 mA | 2.7 V | 24 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
