Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM346M/NOPBIC OPAMP GP 4 CIRCUIT 16SOIC |
1,011 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.4V/µs | 1.2 MHz | - | 50 nA | 500 µV | 1.4mA (x4 Channels) | 20 mA | 3 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LM747HIC OPAMP GP 2 CIRCUIT TO100-10 |
1,799 | - |
|
Datasheet | - | TO-100-10 Metal Can | Bulk | Obsolete | General Purpose | 2 | - | 0.2V/µs | 250 kHz | - | 500 nA | 5 mV | - | 50 mA | 44 V | 44 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-100-10 |
|
LM348M/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
1,723 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1 MHz | - | 30 nA | 1 mV | 2.4mA (x4 Channels) | 25 mA | 36 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LM614CWM/NOPBIC OPAMP GP 4 CIRCUIT 16SOIC |
1,030 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.7V/µs | 800 kHz | - | 10 nA | 5 mV | 450µA (x4 Channels) | 25 mA | 4 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LM614IWM/NOPBIC OPAMP GP 4 CIRCUIT 16SOIC |
1,774 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.7V/µs | 800 kHz | - | 10 nA | 5 mV | 450µA (x4 Channels) | 25 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LM6181IMIC OPAMP CFA 1 CIRCUIT 16SOIC |
4,778 | - |
|
Datasheet | VIP™ II | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 2000V/µs | - | 100 MHz | 5 µA | 3.5 mV | 7.5mA | 130 mA | 7 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LM6181IN/NOPBIC OPAMP CFA 1 CIRCUIT 8DIP |
1,572 | - |
|
Datasheet | VIP™ II | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 1 | - | 2000V/µs | - | 100 MHz | 5 µA | 3.5 mV | 7.5mA | 130 mA | 7 V | 32 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
TL082CP/PBIC OPAMP JFET 2 CIRCUIT 8DIP |
4,524 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 3.6mA (x2 Channels) | 17 mA | 36 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LM13700N/NOPBIC OPAMP TRANSCOND 2 CIRC 16DIP |
4,668 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Transconductance | 2 | Push-Pull | 50V/µs | 2 MHz | - | 400 nA | 300 µV | 2.6mA (x2 Channels) | 500 µA | 10 V | 36 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 16-PDIP |
|
|
BUF634PIC BUFFER 1 CIRCUIT 8DIP |
1,525 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 1 | - | 2000V/µs | - | 180 MHz | 5 µA | 30 mV | 15mA | 250 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
