Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA110SGIC INST AMP 1 CIRCUIT 16CDIP |
1,448 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 17V/µs | - | 2.5 MHz | 10 pA | 50 µV | 3mA | 25 mA | 12 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 16-CDIP |
|
OPA2333SKGD1IC OPAMP ZERO-DRIFT 2 CIRC DIE |
4,632 | - |
|
Datasheet | Zero-Drift | Die | Tube | Active | CMOS, Zero-Drift | 2 | Rail-to-Rail | 0.16V/µs | 350 kHz | - | 70 pA | 2 µV | 17µA (x2 Channels) | 5 mA | 1.8 V | 5.5 V | -55°C ~ 210°C | - | - | Surface Mount | Die |
|
|
OPA4350TDC2IC CMOS 4 CIRCUIT DIE |
3,376 | - |
|
Datasheet | MicroAmplifier™ | Die | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | - | - | - | - | 500 µV | - | - | 2.5 V | 2.5 V | - | - | - | Surface Mount | Die |
|
|
OPA211SKGD1IC OPAMP GP 1 CIRCUIT 0XCEPT |
1,985 | - |
|
Datasheet | - | 7-UltraCSP™ (Xcept) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 30 µV | 3.6mA | 30 mA | 4.5 V | 36 V | -55°C ~ 210°C | - | - | Surface Mount | 0-XCEPT |
|
|
THS4521SKGD1IC OPAMP DIFF 1 CIRCUIT 0XCEPT |
3,035 | - |
|
Datasheet | - | Die | Tray | Active | Differential | 1 | Differential, Rail-to-Rail | 422.5V/µs | 81 MHz | 104.3 MHz | 750 nA | 100 µV | 1mA | 35 mA | 2.5 V | 3.6 V | -55°C ~ 210°C | - | - | Surface Mount | 0-XCEPT |
|
|
OPA2348TDB1IC CMOS 2 CIRCUIT DIE |
1,783 | - |
|
Datasheet | - | Die | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 0.5V/µs | 1 MHz | - | 0.5 pA | 1 mV | - | 10 mA | 2.1 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | Die |
|
|
INA333SKGD1IC INST AMP 1 CIRCUIT 0XCEPT |
2,808 | - |
|
Datasheet | - | Die | Tube | Active | Instrumentation | 1 | Rail-to-Rail | 0.16V/µs | - | 150 kHz | 70 pA | 10 µV | 50µA | 40 mA | 1.8 V | 5.5 V | -55°C ~ 210°C | - | - | - | 0-XCEPT |
|
INA117SMQIC OPAMP DIFF 1 CIRCUIT TO99-8 |
1,047 | - |
|
Datasheet | - | TO-99-8 Metal Can | Tube | Not For New Designs | Differential | 1 | - | 2.6V/µs | - | 200 kHz | - | 120 µV | 1.5mA | 20 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
INA128HDIC INST AMP 1 CIRCUIT 8SOIC |
1,151 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -55°C ~ 175°C | - | - | Surface Mount | 8-SOIC |
|
|
INA129SKGD1IC INST AMP 1 CIRCUIT 0XCEPT |
3,199 | - |
|
Datasheet | - | Die | Tube | Obsolete | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 0-XCEPT |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
