Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VCA2612Y/250IC VARIABLE GAIN 2 CIRC 48TQFP |
3,829 | - |
|
Datasheet | - | 48-TQFP | Tape & Reel (TR) | Active | Variable Gain | 2 | Differential | 300V/µs | 80 MHz | 40 MHz | 1 nA | - | - | 40 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 48-TQFP (7x7) |
|
ISO122UE410-V INPUT, VOLTAGE SENSING ISOL |
1,245 | - |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Active | Isolation | 1 | Single-Ended | 2V/µs | - | 50 kHz | - | 20 mV | 5.5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LT1014MJQUAD PRECISION OPERATIONAL AMPLI |
1,585 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Push-Pull | 0.4V/µs | 700 kHz | - | 12 nA | 60 µV | 350µA (x4 Channels) | 25 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
LMC6042AIJIC CMOS 2 CIRCUIT 8CDIP |
3,044 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-CDIP |
|
INA125TDA2IC INST AMP 1 CIRCUIT DIE |
1,467 | - |
|
Datasheet | - | Die | Tube | Obsolete | Instrumentation | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | Die |
|
|
OPA2335AMJG0.05UV/C MAX, SINGLE-SUPPLY CMOS |
1,204 | - |
|
Datasheet | Zero-Drift | 8-CDIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 2 | Rail-to-Rail | 1.6V/µs | 2 MHz | - | 70 pA | 1 µV | 570µA | 50 mA | 2.7 V | 5.5 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
ACF2101BUG4IC SW INTEG 2 CIRCUIT 24SOIC |
2,489 | - |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width) | Tube | Discontinued at Digi-Key | Switched Integrator | 2 | - | 3V/µs | 2 MHz | - | 0.1 pA | 500 µV | 12mA (x2 Channels) | 25 mA | 14.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
|
OPA627TDB1IC OPAMP GP 1 CIRCUIT DIE |
3,449 | - |
|
Datasheet | Difet® | Die | Tube | Obsolete | General Purpose | 1 | - | 55V/µs | 16 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | 25°C | - | - | Surface Mount | Die |
|
|
VCA8617PAGRIC VARIABLE GAIN 8 CIRC 64TQFP |
3,495 | - |
|
Datasheet | - | 64-TQFP | Tape & Reel (TR) | Active | Variable Gain | 8 | Differential | 300V/µs | 100 MHz | - | 1 nA | - | - | - | 2.85 V | 3.15 V | -40°C ~ 85°C | - | - | Surface Mount | 64-TQFP (10x10) |
|
VCA8500IRGCRIC VARIABLE GAIN 8 CIRC 64VQFN |
3,164 | - |
|
Datasheet | - | 64-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Variable Gain | 8 | Differential | - | 15 MHz | 55 MHz | - | 1 mV | 10µA | 20 mA | 3.15 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 64-VQFN (9x9) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
