Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4541YRBARE DIE 850-MHZ PRECISION FULLY |
2,163 | - |
|
Datasheet | - | Die | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Differential, Rail-to-Rail | 400V/µs | 850 MHz | 150 MHz | 10 µA | 100 µV | 10.1mA | 100 mA | 2.7 V | 5.4 V | -40°C ~ 125°C (TJ) | - | - | Surface Mount | Die |
|
LM10BH/NOPBIC OPAMP GP 1 CIRCUIT TO5-8 |
3,722 | - |
|
Datasheet | - | TO-205AA, TO-5-8 Metal Can | Tray | Active | General Purpose | 1 | - | - | - | - | 10 nA | 300 µV | 270µA | - | - | - | -25°C ~ 85°C | - | - | Through Hole | TO-5-8 |
|
|
LM10BHIC OPAMP GP 1 CIRCUIT TO5-8 |
3,144 | - |
|
Datasheet | - | TO-205AA, TO-5-8 Metal Can | Tray | Active | General Purpose | 1 | - | - | - | - | 10 nA | 300 µV | 270µA | - | - | - | -25°C ~ 85°C | - | - | Through Hole | TO-5-8 |
|
|
ISO124UE410-V INPUT, PRECISION VOLTAGE SE |
3,558 | - |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Active | Isolation | 1 | Single-Ended | 2V/µs | - | 50 kHz | - | 20 mV | 5.5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LF442AMH/NOPBIC OPAMP JFET 2 CIRCUIT TO99-8 |
3,778 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 1V/µs | 1 MHz | - | 10 pA | 500 µV | 300µA (x2 Channels) | 6.8 mA | 10 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
ACF2101BU/1KIC SW INTEG 2 CIRCUIT 24SOIC |
1,772 | - |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Switched Integrator | 2 | - | 3V/µs | 2 MHz | - | 0.1 pA | 500 µV | 12mA (x2 Channels) | 25 mA | 14.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
|
ACF2101BU/1KG4IC SW INTEG 2 CIRCUIT 24SOIC |
4,529 | - |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Switched Integrator | 2 | - | 3V/µs | 2 MHz | - | 0.1 pA | 500 µV | 12mA (x2 Channels) | 25 mA | 14.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
OPA2107AUG4IC OPAMP GP 2 CIRCUIT 8SOIC |
4,327 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | - | 18V/µs | 4.5 MHz | - | 4 pA | 100 µV | 4.5mA (x2 Channels) | 40 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4601CDDAG3IC OPAMP GP 1 CIRC 8SOPWRPAD |
3,048 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 100V/µs | 180 MHz | 440 MHz | 30 pA | 1 mV | 10mA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
OPA2340TDF2IC CMOS 2 CIRCUIT DIE |
4,114 | - |
|
Datasheet | MicroAmplifier™ | Die | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 0.006V/µs | 5.5 MHz | - | 10 pA | 500 µV | - | 50 mA | - | - | - | - | - | Surface Mount | Die |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
