Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PGA206UAG4IC INST AMP 1 CIRCUIT 16SOIC |
1,701 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Discontinued at Digi-Key | Instrumentation | 1 | - | 25V/µs | - | 5 MHz | 2 pA | 1 mV | 12.4mA | - | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
OPA637AUG4IC OPAMP GP 1 CIRCUIT 8SOIC |
1,719 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 1 | - | 135V/µs | 80 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA544FKTTTG3IC POWER 1 CIRCUIT DDPAK/TO263-5 |
2,378 | - |
|
Datasheet | - | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tape & Reel (TR) | Obsolete | Power | 1 | - | 8V/µs | 1.4 MHz | - | 15 pA | 1 mV | 12mA | 2 A | 20 V | 70 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
|
OPA2835TDA2IC VOLTAGE FEEDBACK 2 CIRC DIE |
4,347 | - |
|
Datasheet | - | Die | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 160V/µs | 56 MHz | - | 400 nA | 500 µV | 250µA (x2 Channels) | 40 mA | - | - | - | - | - | Surface Mount | Die |
|
|
OPA2107AU/2K5IC OPAMP GP 2 CIRCUIT 8SOIC |
2,434 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 18V/µs | 4.5 MHz | - | 4 pA | 100 µV | 4.5mA (x2 Channels) | 40 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2107APIC OPAMP GP 2 CIRCUIT 8DIP |
2,127 | - |
|
Datasheet | Difet® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 18V/µs | 4.5 MHz | - | 4 pA | 100 µV | 4.5mA (x2 Channels) | 40 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OPA2107APG4IC OPAMP GP 2 CIRCUIT 8DIP |
2,337 | - |
|
Datasheet | Difet® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 18V/µs | 4.5 MHz | - | 4 pA | 100 µV | 4.5mA (x2 Channels) | 40 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OPA627AUE4IC OPAMP GP 1 CIRCUIT 8SOIC |
4,304 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 1 | - | 55V/µs | 16 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA627AUG4IC OPAMP GP 1 CIRCUIT 8SOIC |
1,510 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 1 | - | 55V/µs | 16 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ISO122JPE4IC OPAMP ISOLATION 1 CIRC 8DIP |
1,636 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm), 8 Leads | Tube | Discontinued at Digi-Key | Isolation | 1 | - | 2V/µs | - | 50 kHz | - | 20 mV | 5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
