Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISO122JUE410-V INPUT, VOLTAGE SENSING ISOL |
3,823 | - |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Active | Isolation | 1 | Single-Ended | 2V/µs | - | 50 kHz | - | 20 mV | 5.5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
ISO122JUG4IC OPAMP ISOLATION 1 CIRC 8SOIC |
4,048 | - |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Discontinued at Digi-Key | Isolation | 1 | - | 2V/µs | - | 50 kHz | - | 20 mV | 5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA3S2859MRTWREPENHANCED PRODUCT DUAL-CHANNEL 90 |
3,064 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Transimpedance | 2 | Rail-to-Rail | 350V/µs | 900 MHz | 14 MHz | 50 pA | 900 µV | 42mA | 110 mA | 3.3 V | 5.25 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 24-WQFN (4x4) |
|
|
V62/22603-01XEENHANCED PRODUCT DUAL-CHANNEL |
1,602 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Transimpedance | 2 | Single Ended, Rail-to-Rail | 350V/µs | 900 MHz | 14 MHz | 50 pA | 900 µV | 44mA | 74 mA | 3.3 V | 5.25 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 24-WQFN (4x4) |
|
|
OPA846TDB2IC VOLTAGE FEEDBACK 1 CIRC DIE |
1,821 | - |
|
Datasheet | - | Die | Tube | Obsolete | Voltage Feedback | 1 | - | 625V/µs | 1.75 GHz | - | 10 µA | 150 µV | 12.6mA | 80 mA | 5 V | 12 V | 25°C | - | - | Surface Mount | Die |
|
OPA549TG3IC POWER 1 CIRCUIT TO220-11 |
3,216 | - |
|
Datasheet | - | TO-220-11 Formed Leads | Tube | Obsolete | Power | 1 | - | 9V/µs | 900 kHz | - | 100 nA | 1 mV | 26mA | 10 A | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-11 |
|
|
OPA2277TDD2IC OPAMP GP 2 CIRCUIT DIE |
1,080 | - |
|
Datasheet | - | Die | Tube | Obsolete | General Purpose | 2 | - | - | - | - | - | 25 µV | - | - | 4 V | 36 V | - | - | - | Surface Mount | Die |
|
OPA637APIC OPAMP GP 1 CIRCUIT 8DIP |
1,309 | - |
|
Datasheet | Difet® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 135V/µs | 80 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
ISO122PE410-V INPUT, VOLTAGE SENSING ISOL |
1,418 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm), 8 Leads | Tube | Active | Isolation | 1 | Single-Ended | 2V/µs | - | 50 kHz | - | 20 mV | 5.5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
ISO122PG4IC OPAMP ISOLATION 1 CIRC 8DIP |
2,162 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm), 8 Leads | Tube | Discontinued at Digi-Key | Isolation | 1 | - | 2V/µs | - | 50 kHz | - | 20 mV | 5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
