Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA126PAIC INST AMP 1 CIRCUIT 8DIP |
3,077 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | - | 0.4V/µs | - | 200 kHz | 10 nA | 150 µV | 175µA | 10 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
INA2126PAIC INST AMP 2 CIRCUIT 16DIP |
4,081 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 2 | - | 0.4V/µs | - | 200 kHz | 50 nA | 150 µV | 175µA (x2 Channels) | 10 mA | 2.7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-PDIP |
|
ISO100CPIC OPAMP ISOLATION 1 CIRC 18CDIP |
2,176 | - |
|
Datasheet | - | 18-CDIP (0.300", 7.62mm) | Tube | Obsolete | Isolation | 1 | - | 0.31V/µs | - | 60 kHz | - | 200 µV | 8mA | 40 mA | 14 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 18-CDIP |
|
|
ISO107IC OPAMP ISOLATION 1 CIRC 16CDIP |
1,637 | - |
|
Datasheet | - | 32-CDIP (0.900", 22.90mm), 16 Leads | Tube | Obsolete | Isolation | 1 | - | 1.5V/µs | - | 20 kHz | - | 20 mV | 75mA | 50 mA | 20 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
|
ISO113IC OPAMP ISOLATION 1 CIRC 16CDIP |
4,658 | - |
|
Datasheet | - | 24-CDIP (0.600", 15.24mm), 16 Leads | Tube | Obsolete | Isolation | 1 | - | 1.5V/µs | - | 20 kHz | - | 20 mV | 90mA | 15 mA | 20 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
OPA124UAIC OPAMP GP 1 CIRCUIT 8SOIC |
1,380 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 1.6V/µs | 1.5 MHz | - | 0.5 pA | 150 µV | 2.5mA | 10 mA | 10 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA124U/2K5IC OPAMP GP 1 CIRCUIT 8SOIC |
3,925 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 1.6V/µs | 1.5 MHz | - | 1 pA | 200 µV | 2.5mA | 10 mA | 10 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA128LMIC OPAMP GP 1 CIRCUIT TO99-8 |
2,486 | - |
|
Datasheet | Difet® | TO-99-8 Metal Can | Tube | Obsolete | General Purpose | 1 | - | 3V/µs | 1 MHz | - | 0.04 pA | 140 µV | 900µA | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
|
OPA128SMIC OPAMP GP 1 CIRCUIT TO99-8 |
3,656 | - |
|
Datasheet | Difet® | TO-99-8 Metal Can | Tube | Obsolete | General Purpose | 1 | - | 3V/µs | 1 MHz | - | 0.075 pA | 140 µV | 900µA | 10 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
OPA129UBIC OPAMP GP 1 CIRCUIT 8SOIC |
1,821 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 2.5V/µs | 1 MHz | - | 0.03 pA | 500 µV | 1.2mA | 10 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
