Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
_4040251^B.jpg "OPA452TAG3")
|
OPA452TAG3IC OPAMP GP 1 CIRCUIT TO220-7 |
2,503 | - |
|
Datasheet | - | TO-220-7 | Tube | Obsolete | General Purpose | 1 | - | 10V/µs | 1.8 MHz | - | 7 pA | 1 mV | 5.5mA | - | 20 V | 80 V | -40°C ~ 125°C | - | - | Through Hole | TO-220-7 |
|
THS3092DDAG3IC OPAMP CFA 2 CIRC 8SOPWRPAD |
4,624 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 5700V/µs | 145 MHz | 160 MHz | 4 µA | 900 µV | 9.5mA (x2 Channels) | 280 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
THS4131CDGKG4IC OPAMP DIFF 1 CIRCUIT 8VSSOP |
2,612 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | - | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-VSSOP |
|
TL071ACDG4IC OPAMP JFET 1 CIRCUIT 8SOIC |
2,186 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 1 | - | 13V/µs | 5.25 MHz | - | 65 pA | 3 mV | 1.4mA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLC2254QPWRG4Q1IC CMOS 4 CIRCUIT 14TSSOP |
2,096 | - |
|
Datasheet | LinCMOS™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 80µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
TLV2254AQDRG4Q1IC OPAMP GP 4 CIRCUIT 14SOIC |
2,922 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 140µA (x4 Channels) | 50 mA | 2.7 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
TLV2460QPWRG4Q1IC OPAMP GP 1 CIRCUIT 8TSSOP |
3,325 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
LME49713HA/NOPBIC AUDIO 1 CIRCUIT TO99-8 |
3,714 | - |
|
Datasheet | - | TO-99-8 Metal Can | Tray | Obsolete | Audio | 1 | - | 1900V/µs | 132 MHz | - | 1.8 µA | 50 µV | 8mA | 100 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
LME49990MA/NOPBIC AUDIO 1 CIRCUIT 8SOIC |
4,734 | - |
|
Datasheet | Overture™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Audio | 1 | - | 22V/µs | 110 MHz | - | 30 nA | 130 µV | 9mA | 26 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMC6001AINIC OPAMP GP 1 CIRCUIT 8DIP |
2,756 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 350 µV | 550µA | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
