Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMP8674MA/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
1,719 | - |
|
Datasheet | LMP® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 20V/µs | 55 MHz | - | 10 nA | 100 µV | 20mA (x4 Channels) | 26 mA | 5 V | 44 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LHV870LC/NOPBIC OPAMP GP 1 CIRCUIT 10UQFN |
1,552 | - |
|
Datasheet | - | 10-WFQFN | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 20V/µs | 55 MHz | 10 MHz | 10 nA | 100 µV | 5mA | 31 mA | 5 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 10-UQFN (2.6x2.6) |
|
THS4521SHKQIC OPAMP DIFF 1 CIRCUIT 8CFP |
3,628 | - |
|
Datasheet | - | 8-CSOIC (0.220", 5.65mm Width) | Tube | Active | Differential | 1 | Differential, Rail-to-Rail | 422.5V/µs | 81 MHz | 104.3 MHz | 750 nA | 100 µV | 1mA | 35 mA | 2.5 V | 3.6 V | -55°C ~ 210°C | - | - | Surface Mount | 8-CFP |
|
|
INA129SHKQIC INST AMP 1 CIRCUIT 8CFP |
2,264 | - |
|
Datasheet | - | 8-CSOIC (0.220", 5.65mm Width) | Tube | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -55°C ~ 210°C | - | - | Surface Mount | 8-CFP |
|
LF398ANIC SAMPL/HOLD 1 CIRCUIT 8DIP |
3,966 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Sample and Hold | 1 | - | - | - | - | 10 nA | 1 mV | 4.5mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LF411ACNIC OPAMP JFET 1 CIRCUIT 8DIP |
4,457 | - |
|
Datasheet | BI-FET II™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 15V/µs | 4 MHz | - | 50 pA | 300 µV | 1.8mA | - | 10 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LF442ACNIC OPAMP JFET 2 CIRCUIT 8DIP |
1,388 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 1V/µs | 1 MHz | - | 10 pA | 500 µV | 300µA (x2 Channels) | 6.8 mA | 10 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LF442CNIC OPAMP JFET 2 CIRCUIT 8DIP |
4,569 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 1V/µs | 1 MHz | - | 10 pA | 1 mV | 400µA (x2 Channels) | 6.8 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LM10CLNIC OPAMP GP 1 CIRCUIT 8DIP |
1,682 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | - | - | - | 12 nA | 500 µV | 280µA | 20 mA | 1.1 V | 6.5 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LM13700NIC OPAMP TRANSCOND 2 CIRC 16DIP |
1,702 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Transconductance | 2 | Push-Pull | 50V/µs | 2 MHz | - | 400 nA | 300 µV | 2.6mA (x2 Channels) | 500 µA | 10 V | 36 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 16-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
