Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6682MA/NOPBIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
215 | - |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 2 | - | 940V/µs | 120 MHz | 190 MHz | 5 µA | 1 mV | 6.5mA (x2 Channels) | 85 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2451CDBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
4,767 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | SOT-23-5 |
|
|
TLV2451IDBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,421 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA | 10 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
INA280A4QDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-5 |
2,128 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2V/µs | 1.1 MHz | 850 kHz | 20 µA | 15 µV | 370µA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SC-70-5 |
|
|
INA280A5QDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-5 |
1,140 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2V/µs | 1.1 MHz | - | 20 µA | 15 µV | 370µA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SC-70-5 |
|
|
OPA355UAIC CMOS 1 CIRCUIT 8SOIC |
232 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 1 | Rail-to-Rail | 360V/µs | 200 MHz | 450 MHz | 3 pA | 2 mV | 8.3mA | 100 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA354AIDDAIC OPAMP VFB 1 CIRCUIT 8SOPWRPAD |
550 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 150V/µs | 100 MHz | 250 MHz | 3 pA | 2 mV | 4.9mA | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
TL032AIDRIC OPAMP JFET 2 CIRCUIT 8SOIC |
7,487 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 570 µV | 434µA (x2 Channels) | 40 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2172IDGKRIC OPAMP GP 2 CIRCUIT 8VSSOP |
3,922 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 10V/µs | 10 MHz | - | 8 pA | 200 µV | 1.6mA (x2 Channels) | 75 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA354AIDDAG3IC OPAMP VFB 1 CIRCUIT 8SOPWRPAD |
368 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | Rail-to-Rail | 150V/µs | 100 MHz | 250 MHz | 3 pA | 2 mV | 4.9mA | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
