Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA187IDGKTIC OPAMP ZERO-DRIFT 1CIRC 8VSSOP |
364 | - |
|
Datasheet | Zero-Drift | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.2V/µs | 550 kHz | - | 100 pA | 1 µV | 100µA | 30 mA | 4.5 V | 36 V | -40°C ~ 150°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
TLV4112IDGNIC OPAMP GP 2 CIRCUIT 8HVSSOP |
4,626 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1.57V/µs | 2.7 MHz | - | 0.3 pA | 175 µV | 700µA (x2 Channels) | 320 mA | 2.5 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-HVSSOP |
|
INA154UAIC OPAMP DIFF 1 CIRCUIT 8SOIC |
543 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | - | 14V/µs | - | 3.1 MHz | - | 100 µV | 2.4mA | 60 mA | 8 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA890IDBVTIC OPAMP VFB 1 CIRCUIT SOT23-6 |
7,225 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 500V/µs | 130 MHz | 260 MHz | 100 nA | 1 mV | 1.1mA | 40 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
TLC084CDRIC OPAMP GP 4 CIRCUIT 14SOIC |
6,868 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x4 Channels) | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LMC6442IN/NOPBIC OPAMP GP 2 CIRCUIT 8DIP |
228 | - |
|
Datasheet | LMC® | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.0041V/µs | 10.5 kHz | - | 0.005 pA | 1.5 mV | 1.9µA (x2 Channels) | 2.1 mA | 1.8 V | 11 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
TLC2264INIC OPAMP GP 4 CIRCUIT 14DIP |
962 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.55V/µs | 730 kHz | - | 1 pA | 300 µV | 800µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 14-PDIP |
|
TL032ACPIC OPAMP JFET 2 CIRCUIT 8DIP |
747 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 2 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 570 µV | 422µA (x2 Channels) | 40 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
TLC2264CNIC OPAMP GP 4 CIRCUIT 14DIP |
362 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.55V/µs | 730 kHz | - | 1 pA | 300 µV | 850µA (x4 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TLV2782CDGKRIC OPAMP GP 2 CIRCUIT 8VSSOP |
4,413 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x2 Channels) | 23 mA | 1.8 V | 3.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-VSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
