Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2626IDGKRIC OPAMP VFB 2 CIRCUIT 8VSSOP |
7,023 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 115V/µs | 120 MHz | - | 2 µA | 15 µV | 2mA (x2 Channels) | 130 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TLC2254AINIC OPAMP GP 4 CIRCUIT 14DIP |
118 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 160µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 14-PDIP |
|
INA157U/2K5IC OPAMP DIFF 1 CIRCUIT 8SOIC |
8,677 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | - | 14V/µs | - | 4 MHz | - | 100 µV | 2.4mA | 60 mA | 8 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2341DGSA/250IC CMOS 2 CIRCUIT 10VSSOP |
483 | - |
|
Datasheet | MicroAmplifier™ | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.6 pA | 2 mV | 750µA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
|
INA133U/2K5IC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,965 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | - | 5V/µs | - | 1.5 MHz | - | 150 µV | 950µA | 32 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2889IDGSRIC OPAMP VFB 2 CIRCUIT 10VSSOP |
634 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 250V/µs | 75 MHz | 115 MHz | 150 nA | 1.5 mV | 920µA (x2 Channels) | 60 mA | 2.6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSSOP |
|
|
OPA2364IDGKRIC CMOS 2 CIRCUIT 8VSSOP |
4,371 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 5V/µs | 7 MHz | - | 1 pA | 900 µV | 1.1mA (x2 Channels) | 85 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA2364IDRIC CMOS 2 CIRCUIT 8SOIC |
1,874 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 5V/µs | 7 MHz | - | 1 pA | 900 µV | 1.1mA (x2 Channels) | 85 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLE2082ACPIC OPAMP JFET 2 CIRCUIT 8DIP |
202 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 40V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
LMV842MA/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
4,020 | - |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 2.5V/µs | 4.5 MHz | - | 4 pA | 50 µV | 1.03mA (x2 Channels) | 37 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
