Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA126EA/250IC INST AMP 1 CIRCUIT 8VSSOP |
2,062 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.4V/µs | - | 200 kHz | 10 nA | 150 µV | 175µA | 10 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
OPA861IDBVTIC OPAMP TRANSCOND 1CIRC SOT23-6 |
405 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Transconductance | 1 | - | 900V/µs | 80 MHz | - | 1 µA | 3 mV | 5.4mA | 15 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
OPA830IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
359 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 600V/µs | 110 MHz | 310 MHz | 5 µA | 1.5 mV | 4.25mA | 85 mA | 2.8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TL288CPIC OPAMP JFET 2 CIRCUIT 8DIP |
3,517 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 18V/µs | 3 MHz | - | 30 pA | 100 µV | 2.6mA (x2 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
TLE2074ACNIC OPAMP JFET 4 CIRCUIT 14DIP |
266 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 45V/µs | 10 MHz | - | 1 pA | 250 µV | 730µA (x4 Channels) | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
TLV4120IDGNRIC OPAMP GP 1 CIRCUIT 8HVSSOP |
431 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Differential | 1.57V/µs | 2.4 MHz | - | 0.3 pA | 100 µV | 1.4mA | 320 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
TLC2274AINIC OPAMP GP 4 CIRCUIT 14DIP |
235 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
OPA140ATDD1IC OPAMP JFET 1 CIRCUIT DIE |
504 | - |
|
Datasheet | - | Die | Tray | Active | J-FET | 1 | Rail-to-Rail | - | 11 MHz | - | - | - | - | - | 4.5 V | 36 V | - | - | - | - | Die |
|
|
INA240A3EDRQ1IC CURRENT SENSE 1 CIRCUIT 8SOIC |
5,840 | - |
|
Datasheet | Zero-Drift | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2V/µs | - | 400 kHz | 90 µA | 5 µV | 1.8mA | - | 2.7 V | 5.5 V | -40°C ~ 150°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
LMP8602QMA/NOPBIC CURRENT SENSE 1 CIRCUIT 8SOIC |
190 | - |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Sense | 1 | - | 0.83V/µs | 60 kHz | - | 0.04 pA | 150 µV | 1.1mA | 48 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
