Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM358DRG3IC OPAMP GP 2 CIRCUIT 8SOIC |
11,030 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
RC4558DGKRG4IC OPAMP GP 2 CIRCUIT 8VSSOP |
4,980 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Differential | 1.7V/µs | 3 MHz | - | 150 nA | 500 µV | 2.5mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-VSSOP |
|
RV4558PIC OPAMP GP 2 CIRCUIT 8DIP |
3,750 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Differential | 1.7V/µs | 3 MHz | - | 150 nA | 500 µV | 2.5mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Through Hole | 8-PDIP |
|
|
TL071CDE4IC OPAMP JFET 3MHZ 8SOIC |
3,000 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 1 | - | 13V/µs | 5.25 MHz | - | 65 pA | 3 mV | 1.4mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLV2361IDBVIC OPAMP GP 7MHZ SGL LV SOT23-5 |
48,000 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tube | Obsolete | General Purpose | 1 | - | 3V/µs | 7 MHz | - | 20 nA | 1 mV | 1.75mA | 20 mA | 2 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLC274ANSR-MANDOPERATIONAL AMPLIFIER |
18,000 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LM2902PWRG3IC OPAMP GP 4 CIRCUIT 14TSSOP |
9,978 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
UA748CDRIC OPAMP GP 1 CIRCUIT 8SOIC |
2,500 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | - | - | 80 nA | 1 mV | 1.7mA | 25 mA | 36 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM2902DRG3IC OPAMP GP 4 CIRCUIT 14SOIC |
7,198 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
LMV822IDRE4IC OPAMP GP 2 CIRCUIT 8SOIC |
4,154 | - |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.9V/µs | 5.5 MHz | - | 40 nA | 1 mV | 500µA | 45 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
