Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC25L2ACPIC CMOS 2 CIRCUIT 8DIP |
4,900 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Single-Ended | 2.9V/µs | 1.7 MHz | - | 1 pA | 900 µV | 29µA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
LM2902KDIC OPAMP GP 4 CIRCUIT 14SOIC |
1,923 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
TLV2762IDRIC OPAMP GP 2 CIRCUIT 8SOIC |
3,770 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA (x2 Channels) | 10.2 mA | 1.8 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LM318PSIC OPAMP GP 1 CIRCUIT 8SO |
2,480 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Bulk | Active | General Purpose | 1 | - | 70V/µs | 15 MHz | - | 150 nA | 4 mV | 5mA | - | 10 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1037CPIC OPAMP GP 1 CIRCUIT 8DIP |
1,225 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 2.5V/µs | 8 MHz | - | 15 nA | 20 µV | - | - | 8 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
TLV2761IPIC OPAMP GP 1 CIRCUIT 8DIP |
2,446 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA | 10.2 mA | 1.8 V | 3.6 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
TLV342AIDRIC CMOS 2 CIRCUIT 8SOIC |
1,666 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 1V/µs | 2.3 MHz | - | 1 pA | 300 µV | 75µA (x2 Channels) | 115 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLC27L1CPIC OPAMP GP 1 CIRCUIT 8DIP |
3,990 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 0.05V/µs | 110 kHz | - | 0.7 pA | 1.1 mV | 14µA | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
TL5580IDRIC OPAMP GP 2 CIRCUIT 8SOIC |
4,791 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 5V/µs | 12 MHz | - | 100 nA | 300 µV | 6mA | 50 mA | 4 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TL5580IPWRIC OPAMP GP 2 CIRCUIT 8TSSOP |
1,098 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 5V/µs | 12 MHz | - | 100 nA | 300 µV | 6mA | 50 mA | 4 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
