Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM324APWIC OPAMP GP 4 CIRCUIT 14TSSOP |
9,272 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 15 nA | 2 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TLC27L2AIPIC CMOS 2 CIRCUIT 8DIP |
3,939 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 2 | - | 0.03V/µs | 110 kHz | - | 0.6 pA | 900 µV | 20µA (x2 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
RC4580IPWIC AUDIO 2 CIRCUIT 8TSSOP |
2,664 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Audio | 2 | - | 5V/µs | 12 MHz | - | 100 nA | 500 µV | 6mA | 50 mA | 4 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
LMV324M-TIIC OPAMP GP 4 CIRCUIT 14TSSOP |
56,378 | - |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 410µA (x4 Channels) | 160 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
TLC080CDGNIC OPAMP GP 1 CIRCUIT 8HVSSOP |
1,776 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Obsolete | General Purpose | 1 | - | 19V/µs | 10 MHz | - | 2 pA | 390 µV | 1.9mA | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
TL3474CPWRIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,563 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 13V/µs | 4 MHz | - | 100 nA | 1 mV | 3.5mA (x4 Channels) | 34 mA | 4 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-TSSOP |
|
TL3414AIDRIC OPAMP GP 2 CIRCUIT 8SOIC |
1,746 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 1.3V/µs | 2 MHz | - | 300 nA | 2 mV | 4mA | 70 mA | 3 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LM2902KPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,800 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
|
TL3414AIPWRIC OPAMP GP 2 CIRCUIT 8TSSOP |
4,116 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 1.3V/µs | 2 MHz | - | 300 nA | 2 mV | 4mA | 70 mA | 3 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
TLC25L2ACDRIC CMOS 2 CIRCUIT 8SOIC |
4,936 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Single-Ended | 2.9V/µs | 110 kHz | - | 50 pA | 900 µV | 29µA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
