Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2401CDRIC OPAMP GP 1 CIRCUIT 8SOIC |
1,856 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.0025V/µs | 5.5 kHz | - | 100 pA | 390 µV | 900nA | 200 µA | 2.5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMC6024IMX/NOPBIC CMOS 4 CIRCUIT 14SOIC |
2,170 | - |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.11V/µs | 350 kHz | - | 0.04 pA | 1 mV | 160µA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
TLV2454CDIC OPAMP GP 4 CIRCUIT 14SOIC |
4,130 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x4 Channels) | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LMC660AIMX-TIIC CMOS 4 CIRCUIT 14SOIC |
568 | - |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 1.5mA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA177FPIC OPAMP GP 1 CIRCUIT 8DIP |
2,086 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 0.3V/µs | 600 kHz | - | 500 pA | 10 µV | 1.3mA | - | 6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLV2444CPWIC CMOS 4 CIRCUIT 14TSSOP |
1,038 | - |
|
Datasheet | LinCMOS™ | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 1 pA | 300 µV | 750µA (x4 Channels) | 50 mA | 2.7 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 14-TSSOP |
|
|
TLV2782IPIC OPAMP GP 2 CIRCUIT 8DIP |
1,933 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x2 Channels) | 23 mA | 1.8 V | 3.6 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
|
TLC27L4ACDIC CMOS 4 CIRCUIT 14SOIC |
454 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 4 | - | 0.05V/µs | 110 kHz | - | 0.7 pA | 1.1 mV | 57µA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
TLC071IDGNIC OPAMP GP 1 CIRCUIT 8HVSSOP |
2,344 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | General Purpose | 1 | - | 19V/µs | 10 MHz | - | 1.5 pA | 390 µV | 2.1mA | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-HVSSOP |
|
|
TLE2021ACPIC OPAMP GP 1 CIRCUIT 8DIP |
3,828 | - |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 0.65V/µs | 1.7 MHz | - | 25 nA | 80 µV | 240µA | 20 mA | 4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
