Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LPV358MXIC OPAMP GP 2 CIRCUIT 8SOIC |
4,704 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.1V/µs | 152 kHz | - | 2 nA | 1.5 mV | 15µA (x2 Channels) | 16 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2773INIC CMOS 2 CIRCUIT 14DIP |
2,480 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Through Hole | 14-PDIP |
|
TLV2765IDRIC OPAMP GP 4 CIRCUIT 16SOIC |
1,291 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA (x4 Channels) | 10.2 mA | 1.8 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
TLC252BCDRIC CMOS 2 CIRCUIT 8SOIC |
2,012 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 2 | - | 2.9V/µs | 2.2 MHz | - | 0.6 pA | 290 µV | 1.9mA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TLV2775CNIC CMOS 4 CIRCUIT 16DIP |
8,746 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
|
TLC27M7CPSIC CMOS 2 CIRCUIT 8SO |
1,191 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | CMOS | 2 | - | 0.62V/µs | 635 kHz | - | 0.7 pA | 190 µV | 285µA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
|
|
TLC085CDRIC OPAMP GP 4 CIRCUIT 16SOIC |
2,500 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x4 Channels) | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
|
LMC6044AIMXIC CMOS 4 CIRCUIT 14SOIC |
2,918 | - |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 52µA (x4 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
OPA651UBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
260 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 300V/µs | 340 MHz | - | 4 µA | 1 mV | 5.1mA | 110 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2262AIPIC CMOS 2 CIRCUIT 8DIP |
2,987 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 710 kHz | - | 1 pA | 300 µV | 400µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
