Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC27M4BIDIC OPAMP GP 4 CIRCUIT 14SOIC |
4,968 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.62V/µs | 525 kHz | - | 0.7 pA | 260 µV | 570µA (x4 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS4222DGKIC OPAMP VFB 2 CIRCUIT 8VSSOP |
2,546 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 2 | Rail-to-Rail | 990V/µs | 120 MHz | 230 MHz | 900 nA | 3 mV | 14mA (x2 Channels) | 100 mA | 2.7 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
THS3111CDGNRIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
3,896 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Discontinued at Digi-Key | Current Feedback | 1 | - | 1300V/µs | - | 100 MHz | 1.5 µA | 3 mV | 4.8mA | 260 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
TLE2061MDIC OPAMP JFET 1 CIRCUIT 8SOIC |
2,841 | - |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV2404CNIC OPAMP GP 4 CIRCUIT 14DIP |
1,520 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.0025V/µs | 5.5 kHz | - | 100 pA | 390 µV | 900nA (x4 Channels) | 200 µA | 2.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TLV4111CDGNIC OPAMP GP 1 CIRCUIT 8HVSSOP |
260 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.57V/µs | 2.7 MHz | - | 0.3 pA | 175 µV | 700µA | 320 mA | 2.5 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
TLV4111CDIC OPAMP GP 1 CIRCUIT 8SOIC |
236 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.57V/µs | 2.7 MHz | - | 0.3 pA | 175 µV | 700µA | 320 mA | 2.5 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TLV2773CDIC CMOS 2 CIRCUIT 14SOIC |
4,815 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC2274MDG4IC OPAMP GP 4 CIRCUIT 14SOIC |
4,852 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
TL034CNIC OPAMP JFET 4 CIRCUIT 14DIP |
189 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 790 µV | 870µA (x4 Channels) | 40 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
