Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA689U/2K5IC OPAMP VFB 720MHZ SGL 8SOIC |
1,939 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | - | 1600V/µs | 720 MHz | 280 MHz | 8 µA | 1 mV | 15.8mA | 105 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA376AIDBVTG4IC OPAMP GP 1 CIRCUIT SOT23-5 |
1,509 | - |
|
Datasheet | e-trim™ | SC-74A, SOT-753 | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Single Ended, Rail-to-Rail | 2V/µs | 5.5 MHz | - | 0.2 pA | 5 µV | 760µA | 50 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
OPA301AIDRIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,678 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 80V/µs | 150 MHz | - | 0.1 pA | 1 mV | 9.5mA | 70 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LME49860MA/NOPBIC AUDIO 2 CIRCUIT 8SOIC |
1,656 | - |
|
Datasheet | LME® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Audio | 2 | - | 20V/µs | 55 MHz | - | 10 nA | 140 µV | 10.5mA (x2 Channels) | 37 mA | 5 V | 44 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2347YEDRIC OPAMP GP 2 CIRCUIT 8DSBGA |
2,248 | - |
|
Datasheet | microPOWER™ | 8-XFBGA, DSBGA | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.17V/µs | 350 kHz | - | 0.5 pA | 2 mV | 20µA (x2 Channels) | 17 mA | 2.3 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-DSBGA (1.9x0.9) |
|
|
OPA726AIDIC OPAMP GP 1 CIRCUIT 8SOIC |
2,615 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 30V/µs | 20 MHz | - | 30 pA | 1.2 mV | 4.3mA | 40 mA | 4 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMH6723MFX-TIIC OPAMP CFA 1 CIRCUIT SOT23-5 |
23,308 | - |
|
Datasheet | LMH® | SC-74A, SOT-753 | Bulk | Active | Current Feedback | 1 | - | 600V/µs | - | 370 MHz | 2 µA | 1 mV | 1mA | 110 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLC274CPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
2,084 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-TSSOP |
|
TLC27M7CPIC CMOS 2 CIRCUIT 8DIP |
4,262 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 0.62V/µs | 635 kHz | - | 0.7 pA | 190 µV | 285µA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
TLV2264QDIC CMOS 4 CIRCUIT 14SOIC |
4,466 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 4 | Rail-to-Rail | 0.55V/µs | 710 kHz | - | 50 pA | 300 µV | 1.5mA (x4 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
