Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2772AMDIC CMOS 2 CIRCUIT 8SOIC |
2,486 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 360 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TLV2773IDGSIC CMOS 2 CIRCUIT 10VSSOP |
4,965 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
TLV2404CDIC OPAMP GP 4 CIRCUIT 14SOIC |
4,367 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.0025V/µs | 5.5 kHz | - | 100 pA | 390 µV | 900nA (x4 Channels) | 200 µA | 2.5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA725AIDRIC OPAMP GP 1 CIRCUIT 8SOIC |
1,942 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 30V/µs | 20 MHz | - | 30 pA | 1.2 mV | 4.3mA | 40 mA | 4 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLC274AINIC OPAMP GP 4 CIRCUIT 14DIP |
2,844 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 900 µV | 2.7mA (x4 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OPA683IDBVRIC OPAMP CFA 1 CIRCUIT SOT23-6 |
3,609 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 540V/µs | 1.44 GHz | 200 MHz | 3 µA | 1.5 mV | 940µA | 150 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
TLV2404AIDRIC OPAMP GP 4 CIRCUIT 14SOIC |
2,500 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.0025V/µs | 5.5 kHz | - | 100 pA | 390 µV | 900nA (x4 Channels) | 200 µA | 2.5 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
TLV2404AIPWRIC OPAMP GP 4 CIRCUIT 14TSSOP |
2,000 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.0025V/µs | 5.5 kHz | - | 100 pA | 390 µV | 900nA (x4 Channels) | 200 µA | 2.5 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
LMV931MGIC OPAMP GP 1 CIRCUIT SC70-5 |
3,877 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
|
TLC075AINIC CMOS 4 CIRCUIT 16DIP |
1,500 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | - | 19V/µs | 10 MHz | - | 1.5 pA | 390 µV | 2.1mA (x4 Channels) | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 16-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
