Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2451CPIC OPAMP GP 1 CIRCUIT 8DIP |
1,407 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
SM73302MFX/NOPBIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,620 | - |
|
Datasheet | SolarMagic™ | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 35V/µs | 88 MHz | - | 0.1 pA | 10 µV | 1.15mA | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
TLV2462AIPIC OPAMP GP 2 CIRCUIT 8DIP |
3,202 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
OPA2350PAIC CMOS 2 CIRCUIT 8DIP |
2,149 | - |
|
Datasheet | MicroAmplifier™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 22V/µs | 38 MHz | - | 0.5 pA | 150 µV | 5.2mA (x2 Channels) | 40 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA835IRUNRIC OPAMP VFB 1 CIRCUIT 10WQFN |
4,140 | - |
|
Datasheet | - | 10-WFQFN | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 260V/µs | 31 MHz | 56 MHz | 200 nA | 100 µV | 250µA | 40 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-WQFN (2x2) |
|
LMP8602QMMX/NOPBIC CURR SENSE 1 CIRCUIT 8VSSOP |
7,000 | - |
|
Datasheet | LMP® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.83V/µs | 60 kHz | - | 0.04 pA | 150 µV | 1.1mA | 48 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
LM7301IMIC OPAMP GP 1 CIRCUIT 8SOIC |
1,253 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.25V/µs | 4 MHz | - | 103 nA | 40 µV | 720µA | 11.7 mA | 1.8 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2442AQPWRIC CMOS 2 CIRCUIT 8TSSOP |
4,848 | - |
|
Datasheet | LinCMOS™ | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 1 pA | 300 µV | 750µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
TLC085CNIC OPAMP GP 4 CIRCUIT 16DIP |
3,481 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 4 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x4 Channels) | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 16-PDIP |
|
ATOPA4343NA/2K5OP AMP, QUAD RAIL-TO-RAIL |
7,500 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
