Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2061ACPIC OPAMP JFET 1 CIRCUIT 8DIP |
4,137 | - |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 500 µV | 290µA | 80 mA | 7 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
OPA703PAIC OPAMP GP 1 CIRCUIT 8DIP |
2,476 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.6V/µs | 1 MHz | - | 1 pA | 160 µV | 160µA | 10 mA | 4 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLC27M9INIC CMOS 4 CIRCUIT 14DIP |
2,973 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | - | 0.62V/µs | 525 kHz | - | 0.7 pA | 220 µV | 570µA (x4 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
TLE2061ACDIC OPAMP JFET 1 CIRCUIT 8SOIC |
2,436 | - |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 500 µV | 290µA | 80 mA | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
INA302A2QPWRQ1INA302-Q1 - AEC-Q100, 36V, BI-DI |
1,130 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Current Sense | 1 | Open Drain | 4V/µs | 440 kHz | - | 115 µA | 10 µV | 850µA | 80 µA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
TLC075IPWPIC CMOS 4 CIRCUIT 20HTSSOP |
2,263 | - |
|
Datasheet | - | 20-PowerTSSOP (0.173", 4.40mm Width) | Bulk | Active | CMOS | 4 | - | 19V/µs | 10 MHz | - | 1.5 pA | 390 µV | 2.1mA (x4 Channels) | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-HTSSOP |
|
|
THS4061IDRIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,005 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA | 115 mA | 9 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2784AIDRIC OPAMP GP 4 CIRCUIT 14SOIC |
3,236 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x4 Channels) | 23 mA | 1.8 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
TLV2264AINIC CMOS 4 CIRCUIT 14DIP |
4,119 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 0.55V/µs | 710 kHz | - | 1 pA | 300 µV | 800µA (x4 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
LMV931MFXIC OPAMP GP 1 CIRCUIT SOT23-5 |
4,147 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
