Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2677HIC OPAMP CFA 2 CIRCUIT 8HSOP |
2,381 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tube | Obsolete | Current Feedback | 2 | - | 2000V/µs | 2 GHz | 250 MHz | 10 µA | 800 µV | 18mA (x2 Channels) | 500 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HSOP |
|
TLC27M9CNIC CMOS 4 CIRCUIT 14DIP |
2,151 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | - | 0.62V/µs | 525 kHz | - | 0.7 pA | 210 µV | 570µA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
TLE2061CDIC OPAMP JFET 1 CIRCUIT 8SOIC |
4,762 | - |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLC084QPWPRQ1IC OPAMP GP 4 CIRCUIT 20HTSSOP |
2,432 | - |
|
Datasheet | - | 20-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x4 Channels) | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-HTSSOP |
|
|
TLV2342IDIC CMOS 2 CIRCUIT 8SOIC |
1,385 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | - | 3.6V/µs | 1.7 MHz | - | 0.6 pA | 1.1 mV | 1.4mA (x2 Channels) | 30 mA | 2 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2694IDRIC OPAMP CFA 2 CIRCUIT 8SOIC |
2,629 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | Differential | 1700V/µs | 690 MHz | 1.5 GHz | 5 µA | 700 µV | 11.6mA (x2 Channels) | 70 mA | 7 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2342IPWIC CMOS 2 CIRCUIT 8TSSOP |
3,993 | - |
|
Datasheet | LinCMOS™ | 8-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | CMOS | 2 | - | 3.6V/µs | 1.7 MHz | - | 0.6 pA | 1.1 mV | 1.4mA (x2 Channels) | 30 mA | 2 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
|
TLC2272ACPWIC CMOS 2 CIRCUIT 8TSSOP |
1,268 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
ONET8511TYIC TRANSIMPEDANCE 1 CIRC DIESALE |
1,786 | - |
|
Datasheet | - | Die | Tray | Obsolete | Transimpedance | 1 | Differential | - | - | 8 GHz | - | - | 46mA | - | 2.95 V | 3.6 V | -25°C ~ 100°C | - | - | Surface Mount | Diesale |
|
|
TLE2082ACDIC OPAMP JFET 2 CIRCUIT 8SOIC |
2,187 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 2 | - | 40V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
