Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC25M4ACDIC CMOS 4 CIRCUIT 14SOIC |
1,649 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Open Drain | 0.6V/µs | 1.7 MHz | - | 0.6 pA | 900 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC25L4ACDIC CMOS 4 CIRCUIT 14SOIC |
3,743 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Single-Ended | 0.04V/µs | 110 kHz | - | 0.6 pA | 900 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
OPA643N/3KIC OPAMP VFB 800MHZ SGL SOT23-5 |
12,000 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | - | 1000V/µs | 800 MHz | - | 19 µA | 2.5 mV | 20mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLV2770IDRIC OPAMP GP 1 CIRCUIT 8SOIC |
1,941 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 500 µV | 1mA | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV2785CPWIC OPAMP GP 4 CIRCUIT 16TSSOP |
1,594 | - |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x4 Channels) | 23 mA | 1.8 V | 3.6 V | 0°C ~ 70°C | - | - | Surface Mount | 16-TSSOP |
|
OPA3681UIC OPAMP CFB 280MHZ TRPL 16SOIC |
4,204 | - |
|
Datasheet | SpeedPlus™ | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 3 | - | 2100V/µs | - | 280 MHz | 30 µA | 1.3 mV | 18mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
TLV2254AINIC OPAMP GP 4 CIRCUIT 14DIP |
4,085 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 140µA (x4 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C | - | - | Through Hole | 14-PDIP |
|
|
TLC27L9INIC OPAMP GP 4 CIRCUIT 14DIP |
1,149 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 0.03V/µs | 110 kHz | - | 0.7 pA | 1.1 mV | 57µA (x4 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
TLE2022CDIC OPAMP GP 2 CIRCUIT 8SOIC |
5,209 | - |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 0.65V/µs | 2.8 MHz | - | 35 nA | 150 µV | 550µA (x2 Channels) | 30 mA | 4 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
OPA2137EA/250IC OPAMP JFET 2 CIRCUIT 8VSSOP |
2,195 | - |
|
Datasheet | MicroAmplifier™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 5 pA | 1.5 mV | 220µA | 60 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
