Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6655MA-TIIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
2,035 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 200V/µs | 260 MHz | - | 5 µA | 1 mV | 4.5mA (x2 Channels) | 120 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2704PAIC CMOS 2 CIRCUIT 8DIP |
3,507 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 3V/µs | 3 MHz | - | 1 pA | 160 µV | 160µA (x2 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
TLE2061IDIC OPAMP JFET 1 CIRCUIT 8SOIC |
505 | - |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2785AIDIC OPAMP GP 4 CIRCUIT 16SOIC |
1,570 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x4 Channels) | 23 mA | 1.8 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 16-SOIC |
|
|
TLC251BCPIC OPAMP GP 1 CIRCUIT 8DIP |
4,401 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 390 µV | 950µA | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LMP8640HVMK-H/NOPBIC CURR SENSE 1CIRC SOT23-THIN |
4,293 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 1.8V/µs | 230 kHz | - | 13 µA | 900 µV | 2.3mA | - | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-THIN |
|
|
LMP8640HVMKE-H/NOPBIC CURR SENSE 1CIRC SOT23-THIN |
1,803 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 1.8V/µs | 230 kHz | - | 13 µA | 900 µV | 2.3mA | - | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-THIN |
|
|
LMP8640HVMKE-F/NOPBIC CURR SENSE 1CIRC SOT23-THIN |
1,313 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 1.8V/µs | 450 kHz | - | 13 µA | 900 µV | 2.3mA | - | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-THIN |
|
|
LMP8640HVMK-T/NOPBIC CURR SENSE 1CIRC SOT23-THIN |
1,008 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 1.8V/µs | 950 kHz | - | 13 µA | 900 µV | 2.3mA | - | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-THIN |
|
|
TL051ACDIC OPAMP JFET 1 CIRCUIT 8SOIC |
4,851 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 1 | - | 20V/µs | 3.1 MHz | - | 30 pA | 350 µV | 2.7mA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
