Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2272AMDRG4IC CMOS 2 CIRCUIT 8SOIC |
244 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TLV2782AIDIC OPAMP GP 2 CIRCUIT 8SOIC |
1,337 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x2 Channels) | 23 mA | 1.8 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLE2141IPIC OPAMP GP 1 CIRCUIT 8DIP |
517 | - |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 45V/µs | 5.9 MHz | - | 700 nA | 200 µV | 3.5mA | 50 mA | 4 V | 44 V | -40°C ~ 105°C | - | - | Through Hole | 8-PDIP |
|
|
TLC4501ACDIC OPAMP GP 1 CIRCUIT 8SOIC |
4,269 | - |
|
Datasheet | LinEPIC™, Self-Cal™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 1mA | 50 mA | 4 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
OPA2658EIC OPAMP CFA 2 CIRCUIT 8VSSOP |
2,421 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Current Feedback | 2 | - | 1700V/µs | - | - | 30 µA | 3 mV | 10mA (x2 Channels) | 120 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLC2274CPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,826 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TLV2373IDIC OPAMP GP 2 CIRCUIT 14SOIC |
287 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 2.1V/µs | 3 MHz | - | 1 pA | 2 mV | 750µA (x2 Channels) | 16 mA | 2.7 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
TLV2784AIDIC OPAMP GP 4 CIRCUIT 14SOIC |
1,148 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x4 Channels) | 23 mA | 1.8 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
TLV2432AIDIC CMOS 2 CIRCUIT 8SOIC |
212 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TLC277CDIC CMOS 2 CIRCUIT 8SOIC |
4,528 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 1.1 mV | 1.9mA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
