Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2227UAG4IC OPAMP GP 2 CIRCUIT 8SOIC |
135 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 10 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TL034ACNIC OPAMP JFET 4 CIRCUIT 14DIP |
1,337 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 580 µV | 870µA (x4 Channels) | 40 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TLE2062AIDIC OPAMP JFET 2 CIRCUIT 8SOIC |
1,547 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 800 µV | 625µA (x2 Channels) | 80 mA | 7 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LM7171AIM/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
438 | - |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 4100V/µs | 200 MHz | 220 MHz | 2.7 µA | 200 µV | 6.5mA | 118 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA643UBIC OPAMP VFB 800MHZ SGL 8SOIC |
5,441 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 1000V/µs | 800 MHz | - | 19 µA | 500 µV | 20mA | 65 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2785CPWRIC OPAMP GP 4 CIRCUIT 16TSSOP |
3,439 | - |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x4 Channels) | 23 mA | 1.8 V | 3.6 V | 0°C ~ 70°C | - | - | Surface Mount | 16-TSSOP |
|
THS4503IDGKRIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
3,491 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 1 mV | 23mA | - | 4.5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
TLC1078MDG4IC CMOS 2 CIRCUIT 8SOIC |
525 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x2 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
THS4081CDGNRIC OPAMP VFB 1 CIRCUIT 8HVSSOP |
4,930 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 230V/µs | - | 175 MHz | 1.2 µA | 1 mV | 3.4mA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
TLE2064AMDRG4IC OPAMP JFET 4 CIRCUIT 14SOIC |
3,796 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
