Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA660APIC OPAMP TRANSCOND 1 CIRC 8DIP |
3,192 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Transconductance | 1 | - | 3000V/µs | - | 850 MHz | 2.1 µA | 10 mV | 26mA | 15 mA | 9 V | 11 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA2134PAG4IC AUDIO 2 CIRCUIT 8DIP |
197 | - |
|
Datasheet | SoundPlus™ | 8-DIP (0.300", 7.62mm) | Tube | Active | Audio | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA (x2 Channels) | 35 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS4042IDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,282 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 400V/µs | - | 165 MHz | 2.5 µA | 2.5 mV | 8mA (x2 Channels) | 100 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LM6171BIM/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
697 | - |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 3600V/µs | 100 MHz | 160 MHz | 1 µA | 1.5 mV | 2.5mA | 116 mA | 5.5 V | 34 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LM3080NIC OP TRANSCONDUCTIVE AMP 8DIP |
44,967 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | Transconductance | 1 | Push-Pull | 50V/µs | - | - | 400 nA | 400 µV | 1.1mA | 650 µA | 4 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-MDIP |
|
OPA4243EA/2K5IC OPAMP GP 4 CIRCUIT 14TSSOP |
3,140 | - |
|
Datasheet | microPOWER™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.1V/µs | 430 kHz | - | 10 nA | 2 mV | 45µA (x4 Channels) | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
THS4120CDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
119 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
THS4012CDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
4,482 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4012IDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
3,601 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS3062DRIC OPAMP CFA 2 CIRCUIT 8SOIC |
3,560 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 7000V/µs | 2.2 GHz | 300 MHz | 6 µA | 700 µV | 8.3mA | 145 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
