Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2652AIPIC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
4,055 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.5 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA211IDGKRIC OPAMP GP 1 CIRCUIT 8VSSOP |
2,500 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 30 µV | 3.6mA | 30 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
OPA656UB/2K5IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,829 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 295V/µs | 230 MHz | 500 MHz | 1 pA | 250 µV | 14mA | - | 8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMH6321TS/NOPBIC BUFFER 1 CIRC DDPAK/TO263-7 |
909 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tube | Obsolete | Buffer | 1 | - | 2900V/µs | - | 110 MHz | 2 µA | 4 mV | 14.9mA | 295 mA | 5 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
LM6144BIMXIC OPAMP GP 4 CIRCUIT 14SOIC |
1,102 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
TL051MLBIC OPAMP JFET 1 CIRCUIT TO99-8 |
836 | - |
|
Datasheet | LinCMOS™ | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Through Hole | TO-99-8 |
|
|
TLC4502CDIC CMOS 2 CIRCUIT 8SOIC |
117 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 2.5mA (x2 Channels) | 50 mA | 4 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
UA747MWBIC OPAMP GP 2 CIRCUIT 14CFP |
147 | - |
|
Datasheet | - | 14-CFlatPack | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | - | - | 80 nA | 1 mV | 1.7mA (x2 Channels) | 25 mA | 7 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 14-CFP |
|
TLC1079INIC CMOS 4 CIRCUIT 14DIP |
4,302 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x4 Channels) | 30 mA | 3 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
INA115AU/1KIC INST AMP 1 CIRCUIT 16SOIC |
3,473 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.6V/µs | - | 1 MHz | 500 pA | 25 µV | 2.2mA | 20 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
