Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2251PAIC OPAMP GP 2 CIRCUIT 8DIP |
196 | - |
|
Datasheet | microPOWER™ | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 20 nA | 100 µV | 27µA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA452FA/500IC OPAMP GP 1 CIRC DDPAK/TO263-7 |
3,392 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 10V/µs | 1.8 MHz | - | 7 pA | 1 mV | 5.5mA | 50 mA | 20 V | 80 V | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
THS4121IDGNRIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
4,633 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
OPA445ADDAROPA445 HIGH VOLTAGE FET-INPUT OP |
18,482 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 15V/µs | 2 MHz | - | 10 pA | 1.5 mV | 4.2mA | 15 mA | 20 V | 90 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
OPA4684IDIC OPAMP CFA 4 CIRCUIT 14SOIC |
1,066 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 4 | - | 780V/µs | 1.9 GHz | 95 MHz | 5 µA | 1.5 mV | 1.7mA (x4 Channels) | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS4508RGTRIC OPAMP DIFF 1 CIRCUIT 16VQFN |
4,350 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential | 6400V/µs | 3 GHz | 2 GHz | 8 µA | 1 mV | 39.2mA | - | 3.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
TLV2264MJIC CMOS 4 CIRCUIT 14CDIP |
272 | - |
|
Datasheet | LinCMOS™ | 14-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 0.55V/µs | 710 kHz | - | 50 pA | 300 µV | 1.5mA (x4 Channels) | 50 mA | 2.7 V | 8 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
|
|
OPA4241UA/2K5IC OPAMP GP 4 CIRCUIT 14SOIC |
1,552 | - |
|
Datasheet | microPOWER™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 4 nA | 50 µV | 25µA (x4 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS4601IDDAIC OPAMP GP 1 CIRC 8SOPWRPAD |
4,333 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 100V/µs | 180 MHz | 440 MHz | 30 pA | 1 mV | 10mA | 80 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
TLC1079CDIC CMOS 4 CIRCUIT 14SOIC |
3,989 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x4 Channels) | 30 mA | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
